Casablanca Fan Company 59065 operation manual Light Kit, Globe

Page 15

Light Kit

www.CasablancaFanCo.com

1.888.227.2178

Install a halogen bulb in each socket. When necessary, replace with bulbs of the same type and wattage.

Globe

Position the indentations in the outer rim of the globe so they line up with the tabs on the inside of the fan light kit. Carefully lift the globe up inside the light kit as far as it will go, then rotate the globe clockwise until it is held tightly in place by the four tabs.

See next page for fan operation instructions.

15

M8502-01 • 10/30/14 • © Casablanca Fan Company

Image 15
Contents Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet BoxOpening toward peak Ceiling BracketHigher DownrodFor angled Ceilings orDownrod Tighten the setscrewLeave at least 8 extending From the topDownrod ball into the slot Lower the adapter cover Put the wires and downrodMotor housing Through the canopy. LetAssembly as shown WiringUsing an orange wire connector from Hardware bagOr common Wall Control BeforeAfter Holes CanopyBlades Blades Globe Light KitOperation Battery Holder DoorReverse LowSpeed HighTo prevent scratching. Cleaning products may Maintenance & CleaningTroubleshooting