Casablanca Fan Company 59020, 59021, 59023 What to Expect with Your Installation, Assess location

Page 2

What to Expect with Your Installation

www.CasablancaFanCo.com 1.888.227.2178

Read and Save These Instructions

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a

friend to help you.

If you are unfamiliar with wiring, use a qualified electrician.

Know your wiring

30 inches

 

from blade tip to

 

nearest wall or

 

obstruction

7 feet

 

 

from bottom

 

edge of blade

 

to the floor

Assess location

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

c.2 - Use only Casablanca replacement parts.

Check box to see fan weight

2

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

42900-01 • 04/16/15 • © 2015 Casablanca Fan Company

Image 2
Contents Table of Contents Assess location What to Expect with Your InstallationCheck box to see fan weight Ladder Power Drill Optional Bit optionalTools Needed Screwdriver includedMake sure all four bumpers are Still attached Ceiling PlateBumper Tabs to loosen the canopy ring and lower it down Hanging the FanUnlock the canopy cover from the canopy ring Body of the fan to hang the fan onWiring FANAfter Wall ControlBefore Canopy Screw Hanging Slot Using both hands, lift the fan body fromCanopy Sides of the fan body between the headTabs TabRing Remove the blade and turn it over BladesWashers, found in the hardware bag Light Kit NotchBattery Holder Door OperationSpeed Battery HolderFan Lights DownMaintenance & Cleaning To prevent scratching. Cleaning products mayTroubleshooting Fan doesn’t workUnpairing Procedure for Faulty Operation of Remote Controls