Casablanca Fan Company 59021, 59023, 59020 operation manual Ring, Tabs

Page 9

Canopy (continued)

www.CasablancaFanCo.com

1.888.227.2178

Canopy

Tab

Holders

Canopy

Ring

Tabs

Before going to the next step, locate the two sets of canopy ring tabs that are on the top edge of the canopy and the two sets of canopy tab holders found at the top of the fan body near the ceiling.

To install the canopy ring, lift the canopy, then rotate clockwise until the tabs are held in place by the tab holders, locking the canopy ring into place.

To check your work, make sure there is an even gap all the way around between the ceiling and the canopy ring.

9

42900-01 • 04/16/15 • © 2015 Casablanca Fan Company

Image 9
Contents Table of Contents What to Expect with Your Installation Check box to see fan weightAssess location Tools Needed Power Drill Optional Bit optionalLadder Screwdriver includedCeiling Plate BumperMake sure all four bumpers are Still attached Unlock the canopy cover from the canopy ring Hanging the FanTabs to loosen the canopy ring and lower it down Body of the fan to hang the fan onFAN WiringWall Control BeforeAfter Canopy Using both hands, lift the fan body fromCanopy Screw Hanging Slot Sides of the fan body between the headTab RingTabs Blades Washers, found in the hardware bagRemove the blade and turn it over Notch Light KitOperation Battery Holder DoorFan Battery HolderSpeed Lights DownTo prevent scratching. Cleaning products may Maintenance & CleaningFan doesn’t work TroubleshootingUnpairing Procedure for Faulty Operation of Remote Controls