Casablanca Fan Company 59095 Ceiling Bracket, For angled ceilings, point Opening toward peak

Page 5

Ceiling Bracket

OFF

For angled ceilings, point

opening toward peak.

www.CasablancaFanCo.com 1.888.227.2178

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use wood screws

 

Use machine screws

(included) when securing

 

(provided with outlet

to support structure with

 

box) when securing to

approved electrical outlet

existing ceiling fan-rated

box. Drill 9/64” pilot holes

 

outlet box. Make sure

in support structure to aid

 

it is securely installed

in securing ceiling bracket

and is acceptable for fan

with hardware found in

support of 31.8 kg (70 lbs)

the hardware bag.

 

 

or less.

 

 

 

 

 

 

 

 

 

 

Make sure all four bumpers are

If you are unable to do this,

still attached.

call Technical Support at

 

1-888-277-2178.

Refer to warning w.1 on pg. 2

 

5

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

M6011-01 • 10/30/14 • © Casablanca Fan Company

Image 5
Contents Table of Contents What to Expect with Your Installation Tools Needed Mounting Options For angled ceilings, point Opening toward peak Ceiling BracketPreparation Downrod Hand Tighten Do not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringOr common Using an orange wire connector fromHardware bag After Wall ControlBefore Holes CanopyBlades sold separately BladesWhich two screw holes you choose Twist counterclockwise Switch HousingConnectors Switch housing screws, found Operation Reverse Button Maintenance & CleaningFan doesn’t work Troubleshooting