Casablanca Fan Company 55060, 55059 operation manual Troubleshooting, Fan doesn’t work

Page 21

Troubleshooting

www.CasablancaFanCo.com

1.888.227.2178

Fan doesn’t work

Make sure power switch is on.

Press a fan speed button (1-4).

Check the wall control battery.

Make sure that you have paired the wall control.

Check the circuit breaker to ensure the power is turned on.

Make sure the blades spin freely.

Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on pages 10-11.

Check the plug connection in the switch housing.

Excessive wobbling

Tighten all of the blade and blade iron screws until they are snug.

Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

Use the provided balancing kit and instructions to balance the fan.

Remote doesn’t work

Install a fresh battery in the wall control.

Make sure you have paired the remote.

Noisy Operation

Tighten the blade and blade iron screws until they are snug.

Check to see if any of the blades are cracked. If so, replace all of the blades.

If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.CasablancaFanCo.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.

Lights dim when turned on or do not turn on at all.

Make sure the wattage of the light bulbs installed matches the specifications on the light sockets.

AUTHORIZED SERVICE

CENTERS

For the most updated list of Casablanca Authorized Service Centers, visit www.CasablancaFanCo.com or call toll free 1-888-227-2178.

21

M6021-01 • 10/30/14 • © Casablanca Fan Company

Image 21
Contents Table of Contents What to Expect with Your Installation Tools Needed Ceiling Standard Support Mounting StructureOutlet Box AngledFor angled ceilings, point Opening toward peak Ceiling BracketPreparation Downrod Steps 1-5 to remove standard downrod pipeSteps 6-10 to reassemble with new pipe Tighten the setscrew Remove the pre-installed Hand tighten the downrod atSetscrew so that the downrod Leave at least 8 extendingDo not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringUsing an orange wire connector from Hardware bagOr common Wall Control BeforeAfter Holes CanopyBlades Switch Housing Socket Shade Socket Ring Socket Ring Tool Light KitTo the short chain coming from Hardware bag With bulbs of the same wattage Switch housingOperation Battery Holder DoorFan Battery HolderSpeed Lights DownMaintenance & Cleaning Light PullChain Fan doesn’t work Troubleshooting

55060, 55059 specifications

Casablanca Fan Company is renowned for its exceptional ceiling fans, and models 55059 and 55060 are no exception. These fans are celebrated for their blend of modern design, advanced technology, and efficient performance, making them popular choices for homeowners and interior designers alike.

The Casablanca 55059, also known as the Isotope, features a sleek and contemporary design that complements various styles of decor. It boasts a unique three-blade design that not only enhances its aesthetic appeal but also contributes to its efficiency in airflow distribution. One of its main features is the integrated LED light kit, providing both illumination and energy efficiency. This light kit offers dimmable capabilities, allowing users to adjust the brightness according to their needs and mood.

The specialized motor technology employed in the 55059 ensures whisper-quiet operation, making it suitable for bedrooms and living areas where peace and tranquility are desired. The fan's versatility is further highlighted by its reversible motor, allowing users to easily switch between summer and winter modes. During summer, the fan generates a cool breeze, while in winter, it circulates warm air from heating sources, enhancing comfort throughout the year.

Similarly, the Casablanca 55060, also known as the Volet, incorporates many of the advanced features found in the 55059 but with a slightly different design aesthetic. The Volet is characterized by its elegant, streamlined look and five blades that provide a more traditional fan experience while still ensuring exceptional airflow. The fan also includes an LED light kit and offers the same dimming capabilities, making it suitable for a variety of spaces.

Both models are equipped with Casablanca's unique Smart Distribution System, which optimizes air movement for maximum comfort and energy savings. The installation process is straightforward, thanks to the included hardware and instructions, and both fans are compatible with various control options, including remote controls and wall controls.

In conclusion, the Casablanca Fan Company 55059 and 55060 models are exemplary in their design and functionality. With their stylish aesthetics, efficient performance, and advanced technological features, they stand out as excellent investments for anyone looking to enhance their living spaces with stylish cooling solutions. Whether you choose the Isotope or the Volet, you can expect reliability and comfort that elevates your home environment.