Casablanca Fan Company 54080, 54081 operation manual Canopy, Holes

Page 11

Canopy

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Screw

Holes

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the

hardware bag.

Note: Fan style may vary.

11

M8501-01 • 01/21/14 • © Casablanca Fan Company

Image 11

Contents Table of Contents What to Expect with Your Installation Tools Needed To hang the fan from a Standard Mounting AngledSupport Structure Standard Ceiling Mounting For angled ceilings, point Opening toward peak Ceiling BracketMake sure all four bumpers are Still attached Preparation Downrod From the top of the downrod Tighten the setscrew Leave at least 8 extending Downrod ball into the slot Flush against the motor housing Through the canopy. LetGrounded from WiringUsing the orange wire Connectors from Using orange wire connectors from Hardware bagHoles CanopyBlades Switch Housing Found Hardware bag Upper switch housingLight Kit Screw the finial onto the threaded rod KeeperChain Reverse SwitchOperation Finial Cap Maintenance & CleaningFan doesn’t work Troubleshooting