Casablanca Fan Company 54080, 54081 operation manual Maintenance & Cleaning, Finial Cap

Page 17

Maintenance & Cleaning

OFF

Be sure to turn off power to the fan before performing any maintenance or relamping.

Globe

Globe

Keeper

Finial Cap

Finial

Changing the bulbs - unscrew the finial and remove it from the threaded rod. Remove the finial cap and the globe keeper while supporting the globe with your other hand. Carefully remove the globe. Unscrew bulbs and replace with bulbs of the same type and wattage. Reinstall the globe assembly.

17

www.CasablancaFanCo.com

1.888.227.2178

Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

For questions regarding removing a light kit, call

customer service 1-888-227-2178.

M8501-01 • 01/21/14 • © Casablanca Fan Company

Image 17
Contents Table of Contents What to Expect with Your Installation Tools Needed To hang the fan from a Standard Mounting AngledSupport Structure Standard Ceiling Mounting For angled ceilings, point Opening toward peak Ceiling BracketMake sure all four bumpers are Still attached Preparation Downrod From the top of the downrod Tighten the setscrewLeave at least 8 extending Downrod ball into the slot Flush against the motor housing Through the canopy. LetUsing the orange wire Connectors from WiringUsing orange wire connectors from Hardware bag Grounded fromHoles CanopyBlades Switch Housing Found Hardware bag Upper switch housing Light Kit Screw the finial onto the threaded rod KeeperChain Reverse SwitchOperation Finial Cap Maintenance & CleaningFan doesn’t work Troubleshooting