CFM UVHB26 warranty INSTAllATION

Page 6

PYROMASTER@ UVHB26 Vent-Free Heaters

INSTAllATION

0 1. PREPARING THE UVHB26

To be sure that each step of the heater installation is in order, use the check-off boxes provided.

The UVHB26 may only be used with the approved mantel and hearth assembly.

1.After determining a location, open the mantel

hearth base carton and place into position on a solid surface. NOTE: Be sure to level the base

before setting the UVHB26 heater in place.

2.Place the heater on the hearth base centering side to side and 3/4" from the back edge of the hearth base (See Fig. 1.)

3.Bend the lower mounting tabs down against the hearth base and secure with two (2) wood screws (See Fig. 1.)

v

r;?' '

r;?" ~~

BRASS TRIM

(SIDES)

Fig. 3. Insulating brass trim.

, ,.,5).:')

, ,.,5)

FP731

0 2. INSTALLING BRASS TRIM

1.Remove brass trim (3 pieces) from carton and remove the protective coating from each piece.

2.Using the provides (2) screws attached the side pieces to the heater (See Fig.3.)

3.Mount the top trim to the heater and be sure to overlap top trim to the front side of the side trim

pieces..

..~.)

')

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Please Read this Manual Before Installing Using Appliance For Your SafetyTablb Contents Safety Devices General InformationOFYOURPYROMASTERVEN~FREEROOM ~I§§§I~ Planning GAS SpecificationsDescription High Elevation DeratingINSTAllATION RUN GAS Line from ITS Source to the Heater PYROMASTER@ UVHB26 Vent-Free Heaters FAN OperationGAS Heater to a 120V Power Bottom Louvre Grille RemovalLava Rock Operating Instructions First FiringLighting Instructions for Honeywell PYROl1ASTER@UVHB26 Vent-Free Heaters To Turn OFF GAS to ApplianceMaintenance Cleaning the Standing Pilot Control SystemFlame Adjustment ~I~~~I~TKOUBLESUOOTING. Uoneywell VS8421 RM4 AccessoriesAccessories GwskUVUB26 Replacement Parts F1 \f. \Replacement Parts UVC Series PartnoPage Limited 2/20 Year Warranty

UVHB26 specifications

The CFM UVHB26 is a cutting-edge vehicle equipped with advanced technology and features that elevate its performance and efficiency, making it a standout in the market. Designed for versatility and reliability, the UVHB26 caters to a wide range of applications including transportation, logistics, and utility services.

One of the key highlights of the CFM UVHB26 is its robust engine, which delivers a powerful performance while ensuring fuel efficiency. The vehicle employs a state-of-the-art turbocharged engine that not only enhances horsepower but also optimizes fuel consumption, making it an environmentally friendly option for modern-day driving. This engine is designed to tackle tough terrains and deliver consistent performance, ensuring that it meets the demands of various operational tasks.

The UVHB26 features an advanced all-wheel-drive system that provides superior traction across different surfaces. This system enhances stability and control, allowing drivers to navigate challenging environments with ease. The vehicle's suspension system is finely tuned to provide a smooth ride, even on rough roads, ensuring that cargo is transported safely and comfortably.

Safety is a paramount concern in the design of the CFM UVHB26. The vehicle is equipped with a comprehensive suite of safety technologies, including advanced braking systems, stability control, and multiple airbags. Additionally, an intuitive driver assistance system helps to enhance situational awareness, reducing the risk of accidents and ensuring a secure driving experience.

Another outstanding feature of the UVHB26 is its spacious interior and cargo capacity. The cabin is designed for comfort and functionality, with ergonomic seating arrangements that provide ample space for both drivers and passengers. The cargo area can be easily adapted to accommodate various loads, making the vehicle ideal for business use.

Incorporating modern connectivity features, the CFM UVHB26 is equipped with an infotainment system that supports smartphone integration, navigation, and communication tools. This ensures that drivers remain connected while on the move, enhancing productivity and convenience.

Overall, the CFM UVHB26 exemplifies innovation in vehicle design, combining powerful performance, safety, and technology to meet the diverse needs of its users. Whether for commercial or personal use, the UVHB26 delivers a dynamic driving experience and remains a reliable choice for those looking for a high-performance vehicle.
Top Page Image Contents