GB
4) PROGRAMMING THE ELECTRONIC TIMER
The timer allows you to set 2 programmes in a 24 hour period to programme the timer.
1.Press the button “ AUTO” (fig. 2), this accesses the 1st programme (programme A). The yellow timer ON lamp will light up.
AM AUTO MAN°F
O
TIMER ON yellow lamp
Fig. 2
/
2.Set the start time for your programme by pressing the “hour button” to set the hour AM and PM and the “min” button to set the minutes.
3.To select how long you require the heater to be on, push button “ 
“ and push repeatedly until your chosen operating timespan appears. The time periods you are able to choose from are (15’, 30’, 45’, 1hr, 2hr, 4hr (max)).
AM | AUTO | AM | AUTO | AUTO |
|
|
|
| °F |
O
O
starting time program A starting time program B operation time
4. To programme the a second time period (programme B) press the “ | AUTO” button |
twice and proceed as above. |
|
(Note: The operating period must be the same as in programme A, if the operating time is changed eg. from 45 mins to 1hr, both programmes will operate for 1 hr).
5.Now set the comfort temperature as previously described by using the thermostat dial. The power level will automatically be set to maximum and will reduce to the lower power levels as required.
The heater will switch on automatically every day at the preset time for the designated time period and will automatically maintain the selected confort temperature. If you wish to cancel a programme depress the “ AUTO” button and then the “hour” and “min” buttons until the display shows:
O
6