Masterpage:Right0
EN 29
Filename [MV5S_08Basic TimerDub.fm]
Page 29Wednesday, 31 August 2005 16:55
TIMER RECORDING
You can programme each deck to timer-record as many as
8programmes up to 30 days ahead.
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the SHOWVIEW number.
NOTES:
●There may be cases that the SHOWVIEW Timer Programming function
prolongs the stop time of the programming.
●When two successive programmes are recorded on a DVD-RW disc
with the SHOWVIEW Timer Programming function, the beginning of the
second one may be left off the recording.
●SHOWVIEW Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
●If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
●To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1Press DVD or VHS to select the deck on which you want to
perform timer programming.
2For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3Press SHOWVIEW to access the SHOWVIEW screen.
4Press the number buttons to
enter the SHOWVIEW number of a
programme you wish to record,
then press ENTER.
●If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
●To clear all entered numbers at a
time, press CLEAR (8).
●If the number you entered is
invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO.
THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW
number.
●If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen,
set Guide Program numbers manually. (墌pg.83)
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. (墌pg.34 )
5The SHOWVIEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
●To cancel this setting, press RETURN.
6Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
●“STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
●“DAILY/WEEKLY” (墌pg.30, “Weekly/Daily Recording”)
●“VPS/PDC” (墌pg.30, “VPS/PDC Rec ording”)
●“REC MODE” (墌pg.27, 28, “Rec ording Mode”)
●“NAME” (墌pg.67, “Modify Title Name”) (DVD deck only)
7Press ENTER to access the Programme Confirmation screen.
8Press ENTER to complete timer programming.
●To programme another timer, repeat steps 3–8.
●If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page35.
9Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
●To disengage the timer mode, press TIMER # again.
SHOWVIEW™ Timer Programming
●Make sure that the unit’s built-in clock is set properly.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the SHOWVIEW programme screen in step 5. When
this happens, set the correct Guide Program number for that station.
(墌pg.83, “SHOWVIEWTM System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the SHOWVIEW
system:
APerform “ SHOWVIEW™ Timer Programming”.
BSet the satellite receiver to the appropriate channel before
the selected programme begins.
CLeave the satellite receiver’s power on.
ENTER

CLEAR ( )

DVD
0 – 9
VHS
CANCEL

SHOWVIEW TIMER

RETURN

IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “SHOWVIEWTM System Setup” (墌pg.83) and
set the Guide Program number correctly.
123
456
789
0
SP
1234
SHOWVIEW PRGM
DATE
START
STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
MV5S_00.book Page 29 Wednesday, August 31, 2005 4:55 PM