Filename [MV5S_05Name.fm]
Masterpage:Left+

18 EN INITIAL SETTINGS

Page 18 Wednesday, 31 August 2005 16:55

Auto Channel Set By Downloading From TV/Auto

Clock Set/Auto Guide Program Number Set

If you have connected the unit to your TV via a 21-pin SCART
cable (墌pg.15), the unit will automatically perform Preset
Download instead of the Auto Set Up in step4 on page 17. After
downloading, the unit sets the clock and Guide Program numbers
automatically.
1Press rt to select “T-V LINK” and press ENTER. The T-V
LINK screen will appear, and the unit automatically performs Auto
Channel Set.
●When Auto Channel Set is
completed, “PLEASE WAIT” will
be displayed for about 90
seconds, since channel data is
exchanged between the DVD
deck and the VHS deck. No
operation will be done during this
time.
A
TTENTION:
Preset positions on the front display
panel increase from “PR 1”; do NOT
press any button on the unit or
remote control until the front display
panel shows clock time, “PR1” or “–
–:––” as illustrated on pag e 19.
NOTES:
●For details, refer to the instruction
manual of your TV.
●In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock Set
nor Auto Guide Program Number Set.
●If there is a power cut, or if you press 1 or SET UP while
downloading or set up is in progress, it will be interrupted; be sure to
turn off the unit power once and try again from the beginning.
●Auto Clock Set may not function properly depending on the reception
condition.
●On this unit, the characters available for station names (ID) are A–Z,
0–9, –, f, + and I (space). Some names of downloaded stations
may differ from those of your TV. (墌pg.87)
Preset Download
A
TTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
ENTER
DVD
VHS
SET UP
●Slide the TV/DVD switch to DVD.
●Perform steps1 to 3 of “Auto Set Up” (墌pg. 17) before continuing.
After “Preset Download” is completed, perform “Monitor Set
(DVD Deck Only)” on page21.
INITIAL SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
EXIT
INITIAL SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
T-V LINK
PLEASE WAIT...
EXIT
MV5S_00.book Page 18 Wednesday, August 31, 2005 4:55 PM