OPERATION

Clockand Timer

The clock must be set for the correct

time of day before a delayed oven function can work properly. The time

of day cannot be changed during a timed oven function, but can be changed during a bake or broil function.

HOW TO SET THE CLOCK

1.Press the CLOCK pad.

2.Press the HOUR/MIN UP and/or DOWN arrow pads to set the time.

3.Press the START pad.

RECALL THE CLOCK

While using your oven for cooking, press the CLOCK pad if you wish to check the time of day. The current time of day will show in the display

POWER FAILURE

If you have experienced a power

failure, the time will flash in the display and will be incorrect Reset your clock.

Any oven cooking function that was in process will need to be reset.

The Kitchen Timer is used to time

cooking processes or other household activities, it does not

control the oven. It can be set for up to 9 hours and 59 minutes. It will count down in minutes until the LAST 68 SECONDS is reached, then the control will beep once. When the countdown reaches ZERO, the

control will beep 3 times followed by one beep every 6 seconds until the

KITCHEN TIMER ON/OFF pad is

pressed. The 6 second beep can be removed for future cycles if desired.

For directions on removing this continuous beep, see Tones on the following page.

HOW TO SET THE TIMER KITCHEN

1.Press the KITCHEN TIMER ON/OFF pad.

2.Press HOUR/IMIN UP and/or DOWN arrow pads to set time.

3.Press the START pad.

4..When the countdown has reached zero, press the KITCHEN TIMER ON/OFF pad to turn off the beep.

To cancel the timer during the countdown, press the KITCHEN

TIMER ON/OFF pad TWICE

8

Page 8
Image 8
Kenmore 911.41789 Clockand Timer, HOW to SET the Clock, Recall the Clock, Power Failure, HOW to SET the Timer Kitchen