CARE AND CLEANING RemovableParts
CLEANING MATERIALS
•Dishwashing detergent
•Warm water
•Scouring pad or
Bump in
of the Ra_
TO REMOVE
1, Pull the racks out to the stop lock position.
2.Pull up the front of the rack and slide under the bump of the rack guide.
TO CLEAN
Clean with warm water and
detergent. For hard to remove stains, gently scrub with a scouring pad
or a
TO REPLACE
1. Place the raised back of the rack onto the rack guides.
2, Lift the front of the rack until the raised back slides under the bump of the rack guides.
3, Slide the rack all the way back
Broil Stop Position
J
Hinge
TO REMOVE
1.Open the door to the broil stop position.
2, Grasp the door at each side and
lift up and off the hinges. DO
NOT LIFT DOOR BY THE
HANDLE.
the_loor is removed
_ CAUTION: When and the hinge arms
are at the broil stop position, as a precaution, cover the hinge arms with
toweling or an empty paper towel roll. Do not bump or
try to move the hinge arms
while working in the oven area. They could snap back causing injury to the hands
or damage the porcelain finish of the front frame.
TO REPLACE
1, Make sure the hinge arms ere in the broil stop position.
2.Lift the door by the sides
3, Line up the slots at the bottom edge of the door with the hinge arms.
4.Slide the door down onto the hinge arms as far as it will go.
5, Close the door
23
