BEFORECALLINGFORSERVICE

To save you time and money, before making a service call check the list below for any problem you may feel you have with the performance of your oven. If the problem is something you cannot fix use the Consumer Service Numbers located at the back of this manual When making any calls have the Model No., Repair Parts list,

Use and Care Manual and the Date of Purchase available.

PROBLEM

The display of your control is flashing "F" followed by a number or letter.

Oven and oven control will not work.

POSSIBLE CAUSE

Oven malfunction.

No power to oven.

POSSIBLE SOLUTION

Press the CLEAR/OFF

pad. Let the oven cool for 1 hour and enter an oven

or cleaning operation. If code repeats, call for service.

Check the circuit breaker or fuse. Make sure the power cord is plugged in.

Oven temperature seems inaccurate,

The clock

is in the

See the

"Setting

Special

black-out

mode.

Features"

section

of this

 

 

manual.

 

 

 

Thermostat

calibration.

See the

adjustments

 

 

described

following this

 

 

section.

 

 

 

Oven will not unlock,

Oven light will not work.

Oven did not clean or results

were poor,

Clean cycle is not finished.

a.Light switch in off position.

b.Oven light bulb burned out

a. Controls were not set

properly,

h. Clean cycle was interrupted.

c, Oven was soiled heavily.

24

Oven temperature must drop below the lock

temperature before the door will unlock.

a. Check oven light switch on the control

panel.

b, Check the oven light bulb.

a. Check the self-cleaning section of this manual.

b. The normal clean cycle should last 4 hours.

co Heavy spillovers should be removed

before the cycle is set. You can also repeat the cycle.

Page 24
Image 24
Kenmore 911.41789 Beforecallingforservice, Problem, Possible Cause, Possible Solution, Oven temperature seems inaccurate