OPERATION
SettingSpecial Features
Your control will allow you to lock the touch pads so they cannot be activated when pressed. If you'reworried about leaving the oven unsupervised, activate this feature.
1.Press and hold, at the same time, the BAKE and BROIL pads for 3 seconds, until the display shows SF.
2.(a) Press the CLEAN pad. The display shows LOC OFF (lockout off).
(b)Press the CLEAN pad again. The display will show LOC ON (lockout on).
3.Press the START pad.
This feature can only be set when the oven is not in use.
When this feature is on, the display will show LOC, if a touch pad is pressed. (This feature will not affect the clock, timer, or oven light pads.)
This feature will automatically convert the temperature you set for traditional baking to convection cooking,
1, Press and hold the CONVECTION BAKE pad for 4 to 5 seconds,
2.Press the TEMP UP or DOWN ARROW pads to set the temperature.
3, Press the START pad. You will see the converted temperature in the display. For example, if you entered 375° the display will show 350° This conversion will need to be set each
time you use Convection Bake.
Your new control has a cook and hold feature for timed cooking only that will keep hot cooked foods warm up to 3
hours after the timed cooking is finished. To activate this feature:
1.Press and hold, at the same time, the BAKE and BROIL pads for 3 seconds, until the display shows SF.
2.(a) Press the OVEN COOKING TIME pad. The display will show
HLd OFF.
(b)Press the OVEN COOKING TIME pad again to activate the feature. The display wil! show HLd
ON
3.Press the START pad.
This special feature will allow you to change the speed; #1 means speed of change is slow up to #5 which means speed of change is fast, To set the speed you prefer, follow these steps:
1.Press and hold, at the same
time, the BAKE and BROIL pads for 3 seconds, until the display shows SF
2.Press the UP arrow pad. The display will show the current set speed.
3.Press the UP arrow to increase the speed up to the number 5.
or
Press the DOWN arrow pad to
decrease the speed down to the number 1.
4.Press the START pad.
18
