Kenmore 911.41789, 911.41785 owner manual Careandcleaning, Self-CleaningCycle

CAREANDCLEANING

Self-Cleaning Cycle

The Clean Cycle, including cool down time, is automatically set for 4 hours, but you may change this from 3 hours if oven is lightly soiled, up to 5 hours if oven is heavily soiled.

pad. 4 hours will

1. Press the CLEAN show in the display.

After the cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth or sponge.

If white spots remain, scrub them with a soap-filled steel woot pad. Be sure to rinse thoroughly. These are usually deposits of salt that cannot be removed during the cycle.

If for any reason you are not satisfied with the cleaning results, just repeat the cycle.

(_(_2. If you want to change the length of clean

HOUR MIN time press the

_ (_ HOURMINUPDOWNand/or arrow pad.

3.Presspad. the START

Simply press the CLEAR/OFF pad You will need to wait for the oven

temperature to drop below the lock temperature (approx. 1 hour) before attempting to open the door.

(_	1.	pad
		Press the CLEAN
_	2.	Ifyouwantto
		change		the length
HOUR	MIN	of clean		time press
_(_		the HOUR/MIN
		UP and/or			DOWN
		arrow pads,
	3.	START		TIME
		Press the DELAY
		pad.
_	4.	Pressthe			UP
		HOUR/MIN
HOUR	MIN	and/or	DOWN
(_(_		arrow	pads to set
		the time you prefer
		the clean cycle to
		start.
	5.	Presspad. the START

2O