Singer 6180, 6160, 6199, 5500 instruction manual

Page 20

(C)

 

1

 

￿

 

 

3

 

 

￿

 

 

￿

2

 

 

 

4

 

5

￿

 

￿

 

C.Thread the machine with your left hand while firmly gripping the thread with your right hand in the following order as illustrated.

*Pass the thread through the thread take-up (3) from right to left.

*Pass the thread through the eye of the needle (5) from front to back. (See following page for instructions on operation of the Automatic Needle Threader.)

IMPORTANT: To verify that the machine is threaded properly in the tension discs, do this simple check:

1.)With the presser foot raised and the needle threaded, pull the thread. You should detect only a slight resistance and little or no deflection of the needle.

2.)Now lower the presser foot and again pull the thread towards the back of the machine. This time you should detect a considerable amount of resistance and much more deflection of the needle. If you do not detect the resistance, this means you have not threaded the machine correctly and need to rethread it.

C. Enfilez le fil de la machine avec votre main gauche tout en tenant le fil fermement de la main droite dans l’ordre suivant comme montré dans l’illustration.

*Faites passer le fil par le releveur de fil (3) de la droite vers la gauche.

*Faites passer le fil par l’orifice de l’aiguille (5) de l’avant vers l’arrière. (Reportez-vous à la page suivante pour les instructions concernant le fonctionnement de l’enfileur de chas d’aiguille automatique.)

IMPORTANT: Pour vous assurer que la machine est correctement pourvue de fil dans les disques de tension, effectuez cette simple vérification:

1.) Avec le pied presseur relevé et l’aiguille non-enfilée, tirer sur le fil. Vous ne devriez sentir qu’une légère résistance.

2.) Ensuite, abaisser le pied presseur et tirez de nouveau le fil vers l’arrière de la machine. Cette fois, vous devriez sentir une forte résistance. Si vous ne sentez pas de résistance, le fil a été mal enfilé et vous devez le réenfiler.

C. Enhebre la máquina con su mano izquierda mientras toma firmemente el hilo con su mano derecha en el orden siguiente tal como está ilustrado.

*Pase el hilo a través del tirahilos (3) de derecha a izquierda.

*Pase el hilo a través del ojo de la aguja (5) de adelante hacia atrás. (Continúe con la página siguiente por instrucciones sobre el funcionamiento del ensartador automático de agujas.)

IMPORTANTE: Para verificar que la máquina ha sido bien enhebrada en los discos de tensión, realice esta verificación sencilla:

1.)Con el prensatelas levantado y la aguja sin enhebrar, jalar el hilo. Deberá detectar solo una ligera resistencia y una pequeña o ninguna deflexión de la aguja.

2.)Ahora vuelva a bajar el pie prensatelas y vuelva a tirar del hilo hacia atrás de la máquina. En ese momento deberá detectar una cantidad considerable de resistencia y mucha más deflexión de la aguja. Si no detecta la resistencia ha enhebrado mal la máquina y deberá volver a enhebrarla.

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 5500 6199/6180/6160 Important Safety Instructions Polarized Plugs Caution USA & Canada only This product is for household use, or equivalentMesures DE Sécurité Importantes Conservez CES Instructions Importantes Instrucciones DE Seguridad Conserve Este Manual DE Instrucciones Table of Contents Table DES Matières Indice DE Contenidos Knowing Your Sewing Machine Principales Partes DE LA MaquinaIdentificación DE LA Máquina Accessories Accessoires Accesorios Setting UP Your Machine Préparation DE LA Machine Préparacion DE LamáquinaSpool Pins Porta CarretesPresser Foot Lifter Palanca PIE PrensatelasDarning Plate Placa TransparenteConverting to FREE-ARM Sewing Utilización DEL Brazo LibreWinding the Bobbin Devanado DE LA BobinaRemoving Bobbin Case from Shuttle Extraccion DE LA Cepsula Bobina DE LA LanzaderaInserting Bobbin Into Bobbin Case Insercion DE LA Bobina EN LA Capsula BobinaEnhebrado DEL Hilo Superior Inserting Bobbin Case Into ShuttleThreading the TOP Thread Page Using Automatic Needle Threader Empleo DEL Ensartador Automático DE AgujaCm clear Relever le pied presseurNEEDLE, Thread and Fabric Chart For best sewing results, always use a Singer branded needleTabla DE HILO, Aguja Y Material Material Hilo AgujasChanging the Needle Cambio DE LA AgujaAdjusting TOP Thread Tension Ajuste DE LA Tension DEL IlosuperiorCostura Recta Costura ZIG ZAG y DecorativaFunciones DE Panel DE Control Botones Para Elegir Numero DE PuntadaStraight Stitch Needle Position Ajuste DE Posicion DE Aguja Para Puntada RectaChanging Presser Foot Cambio DEL PIE PrensatelasHelpful Messages Mensajes DE AyudaInterruptor DE Costura Hacia ATRÁS/REMATE Reverse Operation ButtonInterruptores DE Funcionamiento Starting to SEW Empezar a Coser29 28 61 54 95 75 Pattern number reference guide Straight Stitching Puntada RectaManteniendo LA Puntada Derecha AjustesColocación DE Cierres Y Vivo HAND-LOOK Quilt StitchPuntada DE Acolchado Continua Inserting Zippers Zigzag Stitching Puntada ZIG-ZAGMULTI-STITCH Zigzag ZIG-ZAG DE Tres PuntadasShell Stitch Puntada DE LenceriaPuntada DE Relleno O Satín Ubicacion DE LOS PatronesCosido DE Botones Settings Presser foot General purpose foot Darning plateSewing on a Button Pose DE Boutons Blindhem Stitch Point Invisible Puntada Invisible Thread Tension ControlPage Decorative and Stretch Stitches Puntadas Decorativas Y ElásticasPuntada Recta Triple Puntada PanalPuntada SOBRE-ORILLADO Puntada PlumaPuntada RIC RAC Puntada Overlock DoblePuntada Entrecruz Puntada EntredosPuntada EN Escalera Used primarily for decorative machine stitchingPuntada Alfiler Inclinado Puntada DE BrochePuntada DE Ribete Puntada Overlock Inclinado Puntada CruzadaPuntada Llave Griega Puntada RaspaPuntada Herringbone Puntada SOBRE-BORDEReforzado Puntada UNE-ORILLASThread tension control 5 or Buttonhole Making ProcedimientoFabric marking Mark Ojales CON Cordon Buttonhole foot alignment positionCaring for Your Machine Cuide SU MaquinaCleaning the sewing machine and footcontroller Limpiar EL Área DEL Transportador Y LA LanzaderaOption Accessories Accesorios OpciónLarge Extension Table Base DE ExtensionPerformance Checklist General ProblemsVérification DES Petits Problèmes DE Couture Problemas Generales Cuadro DE Verificacion DE RendimientoEnglish / Français / Español
Related manuals
Manual 64 pages 34.39 Kb

5500, 6199, 6160, 6180 specifications

Singer is a renowned name in the world of sewing machines, consistently pushing the envelope to deliver innovative products that cater to both novice and experienced sewists. Among their extensive range of machines, the Singer 6199, 5500, 6180, and 6160 models stand out due to their robust features, advanced technologies, and user-friendly characteristics.

The Singer 6199 is known for its versatility. This machine offers a wide variety of stitch options, including utility, decorative, and stretch stitches, making it suitable for various projects, from garment construction to home décor. Its automatic needle threader simplifies setup, allowing users to focus more on their creativity. The adjustable stitch length and width give the user complete control, enhancing the sewing experience.

Moving on to the Singer 5500, this model is designed with practicality in mind. Its heavy-duty construction ensures stability while sewing through thick fabrics, making it ideal for quilters and those working with denim. The one-step buttonhole feature simplifies the process of creating professional-looking buttonholes, while the built-in stitch guide allows beginners to easily choose the right stitch for their fabric. This machine also boasts a powerful motor, ensuring consistent performance even when working with challenging materials.

The Singer 6180 incorporates a wealth of advanced features that further enhance its usability. With a digital LCD screen, sewists can easily select and view stitch patterns, facilitating a seamless sewing experience. The included walk foot and quilting accessory pack make this machine a favorite among quilting enthusiasts. This model also supports sewing fonts, enabling users to personalize their creations with custom text—a valuable addition for creating unique gifts or home items.

Lastly, the Singer 6160 combines elegance with functionality. Its sleek design is complemented by a host of features, including an automatic tension adjustment system that guarantees consistent results regardless of fabric thickness. The high-speed sewing capability allows for efficient project completion, while the multiple needle positions cater to various stitching techniques. Additionally, the drop-in bobbin system simplifies threading and maintenance, making it user-friendly for those new to sewing.

In conclusion, the Singer 6199, 5500, 6180, and 6160 models exemplify the perfect blend of technology, versatility, and user-centric design. These machines are equipped to handle an array of sewing tasks, ensuring that both beginners and experienced sewists can achieve their creative visions with ease. As technology continues to evolve, Singer remains committed to providing solutions that inspire and empower crafters around the world.
Top Page Image Contents