Singer H74 instruction manual Return bobbin winder shaft to left

Page 76

WARNING FUNCTIONS

Warning beeping sound

-When operating correctly: 1 beep

-When the memory is full 20 units of pattern: 3-short beeps

-When operating incorrectly: 3-short beeps

-When the sewing machine is in trouble and can't sew: 8 seconds short beeps

It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer to the "Trouble shooting guide" on pages 75 & 76 for solutions. After the problem has been solved, the machine will continue to sew.

Return bobbin winder shaft to left

If the bobbin winder shaft is positioned to the right (engaged) and any button is pressed a 3- beep warning will be sounded. Move bobbin winder shaft to the left (disengaged) to allow the buttons to be operational.

Please Note: If the problem is not resolved, please contact SINGER at www.singer.com.

Attention: If the thread gets jammed inside the hook during sewing, stopping the needle from moving, the security switch will stop the machine completely. In order to restart the sewing machine, you will have to turn the on/off switch to the OFF position and then ON again.

Image 76

Contents Page Symbol Instructions Important Safety Instructions Contents Contents Principal Parts of the Machine Operation buttons see page 24/25/26 Machine Control ButtonsFunction buttons see page 27/28/29 Selection buttons see page 30/31 LCD Screen AlphabetMemory ElongationPattern Chart PatternsAlphabets Standard AccessoriesOptional Connecting the Machine to the Power Source Connecting the machineWinding the Bobbin Bobbin windingWinding the Bobbin Inserting the Bobbin Threading the Upper Thread Threading the Upper Thread Using the Needle Threader Drawing UP the Lower Thread Cutting the ThreadAdjusting Presser Foot Pressure TWO-STEP Presser Foot LifterStart/stop button Starting SewingFoot control Thread Tension Changing the Presser Foot Presser Foot Chart Application Needle Presser FootPlease Note Replacing the Needle Raise or Lower the Feed DogsOperation Buttons Reverse button Auto-lock button Needle up/down position button Function Buttons Function Buttons Mirror button see Twin needle button seeSelection Buttons Edit button Memory button Clear buttonSewing Tips Sewing cornersReverse Free armInstalling the extension table More FeaturesSewing on heavy fabrics Needle Position and Stitch Length Zigzag StitchesStretch Stitches Using the all purpose foot Using the overcasting footOvercasting Stitches Blind Hems Button Sewing Buttonhole Sewing Lightly hold the end of the upper thread and start sewing 17 B-18 19 B-20 B-21 22 B-23 B-24 25 B-26 Making corded buttonholes BAR Tack Stitch Eyelet Stitch Darning Stitch 2mm Zipper Insertion Inserting a centered zipperInserting a lapped zipper Rolled hem foot is an optional accessory Narrow HemmingCording Single cording Triple cordingSatin Stitch Sewing Straight Stitch Foot is an optional accessory EDGE/QUILTING GuideGathering foot is an optional accessory GatheringSmocking Free Motion Sewing DarningEmbroidery MonogrammingWalking Foot Roller Foot Side CutterStraight Stitch Foot Piecing Foot Open TOE FootEdge Joining Foot Invisible Zipper Foot NON-STICK FootFagoting Decorative TopstitchingScallop hem Scallop StitchScallop edging Elongation Mirror Image Using the Twin Needle Regardless of what kind of sewing will be carried outMemory Combining patterns or lettersAdding patterns or letters Editing patterns Clearing patterns or lettersRecalling and sewing the memorized pattern Sewing machine is experiencing a problem Instruction animation message displayReturn bobbin winder shaft to left Buzzer Sound Maintenance Cleaning the screenCleaning the sewing machine surface Cleaning the hookMaintenance Trouble Shooting Guide Problem Cause CorrectionProblem Cause Correction Reference Group patterns-10 Direct patterns Stitch Adjustment Reference ChartGroup patterns-50 Darning Group patterns-66 Auto 021H7A0101 Apr/11 Singer H74H74A/B5