1.
2.
3.
4 .
5
Hose
Suction
Control
Button
6* 7*
8*
9*
10*
11*
12*
14
ENGLISH
!Caution: Risk of injury. Do not use Dust Container Handle to carry cleaner.
INSTRUCTIONS FOR USE
•Do not operate without the filters in place.
1Pull power supply cord out from back of cleaner and plug into electri- cal outlet. To rewind, remove from electrical outlet, step on cord reel button, hold and guide plug while it rewinds.
Note: When pulling on power supply cord watch for a yellow line on the cord. Then continue slowly pulling on cord till you see the red line, stop. The red line indicates the end of usable cord.
2Press the ON/OFF button to switch the cleaner on. (I) is ON/ (O) is OFF.
3To rewind the power cord, press the rewind button with foot and guide the cord with hand to ensure that it does not whip causing damage.
4By moving the suction control button, the suction power can be adjusted.
5Suction can also be regulated on the hose handle by opening / clos- ing the button.
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once a week over the entire area. Vacuum slowly, making several passes (for- ward and backward), covering small areas at a time. The time required to clean will depend on several factors - including type of floor and amount of dirt.
Cleaning Tools
5Hose Handle: On/Off ( I )/(o) switch is to turn the Power Nozzle brushroll on and off. On ( I ) for carpets and Off (o) for hard sur- faces.
6Crevice Nozzle*: (stored on tool clip on wand): For crevices, corners, baseboards, between cushions.
7Upholstery Nozzle*: (stored on tool clip on wand): For curtains, draperies, cushions, fabrics.
8Turbo Brush*: For upholstery and for stairs.
9Bare Floor Brush*: For any type of hard surface floor.
10Combo Brush*: For furniture, blinds, books, lamp shades, shelves
11
12Tool Caddy*: To store cleaning tools. Clips on wand.
*(on some models)