Euro-Pro UV209H Cyclonic Bagless Upright, To Order Replacement Filters or Belts, Please Note

PRECAUTIONARY MEASURES

Important: If the suction opening in the unit, the hose or the extension tube become blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

CYCLONIC BAGLESS UPRIGHT

TO ORDER REPLACEMENT FILTERS OR BELTS

or FOR TECHNICAL SUPPORT

for Model UV209H

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Do not vacuum any liquids.

4.Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitator and other moving parts.

6.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

7.Do not run appliance over power cord.

8.Do not use without dust cup filter or filters in place.

9.Before you start vacuuming, make sure to remove large or sharp objects that might damage the vacuum.

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note:

Filter Ring, Pre-Motor, Secondary and Exhaust Filters are washable. They should however be replaced every three (3) months to ensure peak performance of your vacuum.

The HEPA Dust Cup Filter may be washed. It should, however, be replaced every three (3) to six (6) months, depending on amount of use, to ensure peak performance of your vacuum. We recommend washing it once a month or when suction appears to be reduced. To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap until all observable dirt has been removed. Some discoloration of the HEPA filter material may occur, this is normal and will not affect the filter's performance. When finished, shake off excess water. Do NOT wash in dishwasher.

It is important that when you wash the HEPA dust cup filter, filter ring, secondary filter, pre-motor filter or the exhaust filter you allow them to dry COMPLETELY before using again. We recommend 24 hours to air dry.

DO NOT DRY IN DRYER.

Important:

Make sure that ALL washable Filters are completely dry before inserting back in the vacuum.