Eureka 96 manual Clean Dust Cup Filter, Cup and fit dust cup into nozzle O, Air dry thoroughly

		ENGLISH
	B	HOW TO MAINTAIN
		The instructions given in this booklet serve as a guide to
	●
		routine maintenance. Keep the cleaner operating at top
		efficiency. Empty the dust cup after each use.
		Empty Dust Cup
O	D	B
●		Step 1: Slide dust cup latch ● up.
	●	D
		Step 2: Pull dust cup ● from handle section and lift from
		O
		the nozzle ● (Fig. 9).
		E	D
		Step 3: Pull the filter ● out of the dust cup ●, shake
	FIG. 9	contents of dust cup into a waste container (Fig. 10).
		D	E
		Step 4: To replace dust cup ●, reinstall filter ● in dust

cup and fit dust cup into nozzle ●O .

Step 5: Gently squeeze the sections together until the dust cup latch ●B locks the cup in place (Fig. 11).

●D

FIG. 10

●B

Clean Dust Cup Filter

Note: Do NOT operate cleaner without the filter in place.

Clean the dust cup filter as necessary (Fig. 12). Step 1: Remove dust cup ●D .

Step 2: Pull dust cup filter ●E frame out of dust cup ●D .

Step 3: Shake and brush the dust and dirt from filter ●E .

Step 4: If desired, launder the filter ●E by hand. Wash filter in warm water using mild detergent.

Note: The dust cup filter is not dishwasher safe. Do not put in dishwasher.

Step 5: Air dry thoroughly.

Step 6: Replace filter frame in dust cup ●D by pushing the seal located at the top in firmly to ensure proper filter ●E performance.

Replace a dirty or torn filter. Order additional dust cup filter, part number 61544.

●O

●D

FIG. 11

●E D

●D

12 FIG. 12 (CONTINUED)