Identify Parts | On/Off Switch |
| Charging Light |
Screws and | Dust Cup Latch |
Cavity Wall |
|
Anchors | Motor Filter |
| |
| Dust Cup Filter |
Dust Cup | Charging | Charger |
| Socket | |
|
| Plug |
| Wall Mount |
|
| Bracket |
|
USING THE VACUUM CLEANER
1.To switch on, move the on/off switch forward toward the dust container.
2.To switch off, move the on/off switch backward toward the handle.
How to Wall Mount your Wall Bracket
CAUTION: Use only charger model
Your vacuum cleaner has a special bracket designed to hold the unit, so that it may recharge while mounted on the wall. The wall bracket can be positioned whichever way is convenient for the location you have chosen.
Mount on a wall where there are no dangerous objects hidden beneath the wall surface like electrical wires, pipes, etc.
1.Hold bracket against wall to mark location for screws.
2.Use a 1/4 inch drill for drilling holes for the plastic anchors.
3.Insert the anchors. Line up the bracket with the anchors.
4.Use a screwdriver to drive the screws into the anchors to secure the bracket.
Holes for Screws.
Charging Socket
5