HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the cleaner operating at top efficiency. Empty the dust cup and clean the filter after each use.
Empty Dust Cup
Dust Cup
Latch
1.Push down on dust cup latch.
2.Pull dust cup from handle section.
4.Press dust cup onto handle section until they snap together.
Clean Filters
Clean the filters after each cleaner use.
1.Open dust cup. (See above.)
2.Pull dust cup filter off handle section.
3.Pull motor filter out of filter grid.
4.Shake and brush the dust and dirt from filters.
5.If desired, launder the filters by hand in warm water (150°F, 65°C) using a mild detergent.
6.Air dry thoroughly.
7.Replace filters and dust cup.
3. Shake contents into a waste container.
Filter
Grid
Motor
Filter
Dust Cup
Filter
Replace dirty or torn filters. Order additional filters from The Eureka Company, Bloomington, IL 61701.
Motor Filter, part number 61881
Dust Cup Filter, part number 61882
7