HOW TO MAINTAIN (continued)
Brush Roll
NOTE: Turn off switch and remove battery before inspecting brush roll.
Long hair, thread, string, etc. can wrap around the revolving brush roll and result in reduced performance.
To check brush roll for debris turn cleaner nozzle over and inspect for wrapped matter. Use scissors to cut debris from brush roll. When brush roll is clean reinstall the battery and resume operation.
How to Check for Blockages
Brush Roll
NOTE: Turn off switch and remove battery before checking for blockages.
If suction performance diminishes and battery is still strong, check for blockages in suction path.
Hole
1.Remove dust cup and set aside. Remove battery and set aside.
2.Inspect for blockages inside hole area at base of body opening. Use tool or coat hanger to remove blockage.
Access
Door Latch
Brush Roll |
Area |
3. Reinstall dust cup. | 4. Flip vacuum over and inspect dirt |
| channel in brush roll area. Open access |
| door by pulling back on access door |
| latch and lifting up, check for blockage. |
| Remove any blockages with tool or coat |
| hanger. |
9