Eureka 5700-5739 warranty General Information, Thermal Cut Off, Service Information

Page 2

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.

Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing.

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual. Use only manufacturer’s recommended attachments.

Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

Do not use extension cords or outlets with inadequate current carrying capacity.

Turn off all controls before unplugging.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle plug or vacuum cleaner with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

Do not place cleaer on furniture or stairs as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using attachments.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without dust bag or filter(s) in place.

Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.

Use extra care when cleaning on stairs.

Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.

Store your cleaner indoors in a cool, dry area.

Keep your work area well lighted.

Unplug electrical appliances before vacuuming them.

Unplug before connecting turbo nozzle, model 26.

SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

GENERAL INFORMATION

Use the cleaner to pick up dirt and dust particles. Avoid picking up hard or sharp objects that could damage the vacuum cleaner.

Service Information

The instructions in this booklet serve as a guide to routine maintenance. For additional service information, telephone our toll free number for the nearest Eureka Authorized Warranty Station. You should know the model, type and serial number or date code when you call:

USA: 1-800-282-2886 Mexico: 5670-6169

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 North Main St., Bloomington, Illinois 61701, USA. In Canada, write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Warranty for complete service information

DO NOT OIL the motor or the brush roll.The motor and brush roll are permanently sealed and lubricated.

Thermal Cut Off

This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner sud- denly shuts off, push the on/off switch off (0) and unplug the cleaner. Check the cleaner for a possible source of over- heating such as a full dust cup, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the cleaner. After the 30 minute period, plug the cleaner back in and push the on/ off switch on (l). If the cleaner still does not run, then take it to a Eureka Authorized Service Center for repair.

.

2

Image 2
Contents OWNER’S Guide Do not return this product to the storeThermal Cut Off Service InformationGeneral Information USA 1-800-282-2886 Mexico CanadaQuick Reference Helpful InformationAttach Handle HOW to AssembleStore Hose and Accessories Attach HoseNested extension wands to add reach HOW to USEPlace desired accessory onto end of hose or wand Hose or WandReinstalling the Dust Bag Cover Routine MaintenanceInstalling New Dust Bag Removing the Dust Bag Style LSRoutine Maintenance Periodic MaintenanceBrush Roll Belt, Style U How To Replace Brush Roll BeltBrush Roll Lower Problem SolvingTo Clear Blockages in Hose HoseEureka Limited Warranty

5700-5739 specifications

The Eureka 5700-5739 series represents a remarkable lineup of advanced cleaning machines designed specifically for industrial and commercial use. These models are engineered to deliver optimal performance in a variety of environments, including warehouses, large retail spaces, and manufacturing facilities. One of the most notable features of the Eureka 5700-5739 series is its powerful suction technology. Equipped with high-efficiency motors, these machines provide superior dirt and debris removal, ensuring that surfaces remain clean and safe for operation.

Another key characteristic of the Eureka 5700-5739 series is its versatility. These machines are available in different configurations, allowing users to select models that suit their specific cleaning needs. Whether it is a compact version for tight spaces or a larger model for expansive areas, the series caters to all requirements. Additionally, each model is designed with user-friendly controls that facilitate easy operation, even for operators with minimal training.

The construction of the Eureka 5700-5739 series reflects a commitment to durability and ergonomics. Built from high-quality materials, these machines are designed to withstand the rigors of daily use. Features such as reinforced chassis and heavy-duty wheels enhance mobility, making it easier to transport the units from one location to another. Ergonomic design elements, including adjustable handles, ensure that operators can maneuver the machines with minimal physical strain, thereby promoting safety and efficiency.

Advanced filtration technology is another standout aspect of the Eureka 5700-5739 series. The machines are equipped with HEPA filters, which capture fine dust and allergens, contributing to improved air quality in the workplace. This is particularly beneficial in settings where sensitive operations take place or where employees may be exposed to dust and contaminants.

In terms of maintenance, the Eureka 5700-5739 series features easily accessible components, simplifying routine checks and part replacement. This design consideration significantly reduces downtime, allowing businesses to maintain consistent cleaning schedules without interruption.

Overall, the Eureka 5700-5739 series combines power, versatility, and user-friendly features to deliver a cleaning solution that meets the demands of modern industrial environments. Its focus on durability, advanced filtration, and ergonomic design makes it a reliable choice for those seeking effective and efficient cleaning solutions.