Earlex IS2000 manual Fitting the Bonnet 32 to the Upholstery Cleaner

Page 11

Fitting the Bonnet (32) to the Upholstery Cleaner (29)

Take the Bonnet, place it on a flat surface with the strings at the top and the nap facing outwards and place the Upholstery Cleaner in the middle. Pull the string until the Bonnet fits tightly to the Upholstery Cleaner, and tie with a bow.

When cleaning upholstery you will need to glide the head across the material in the same way as when using the Floor Cleaner. The bonnets will need to be replaced as they become dirty. Used bonnets can be washed and re-used. Wash at 90˚C for maximum longevity. Do not use bleach or fabric conditioner and use only one third of normal soap powder to avoid clogging the fibres.

Spare Bonnets can be purchased from Earlex or you can make your own using Terry Toweling material.

The Upholstery Cleaner can also be used very effectively for removing the creases from hanging curtains.

Upholstery Cleaner/Clothes Steamer

To set up your Steam Caddy as a Clothes Steamer proceed as follows:-

In the Plug Storage Recess (22) there is a socket (23) to accept the button end of the Extension Tubes. Fit the Extension Tubes together and then locate both into this socket. Now fit the Clothing Attachment Rest (30) into the top of the Extension Tube. Your clothes can now be hung from this Clothing Attachment Rest using a normal coat hanger.

Press the Steam Release Button and pass the Clothes Steamer lightly across the surface to remove creases and wrinkles from your clothes.

We recommend that the unit remains on the floor and shorter garments are steam cleaned from a seated position as shown. Longer garments can be hung from a wardrobe rail or over the top of a door. The Clothing Attachment Rest is used to “park” the Clothes Steamer

safely in between steaming your clothes. It can also be used to park the Window/Tile Cleaner.

Please note, the Clothes Steamer is designed to refresh clothes (i.e. appearance & odour), it is not designed to be a replacement for your steam iron. If the yellow button on the handle is pressed continuously you may begin to see drips of water appear (this is due to the steam condensing in the tube), by using "bursts" of steam as opposed to "continuous" steam this will be reduced. If you should notice drips of water

from the bonnet, you should stop steaming, and wait a few seconds before dryingthe Bonnet with a hand towel.

IMPORTANT – Some articles of clothing are made from very delicate materials. Always refer to the labels in the garment, or check with the shop where the garment was bought, before applying steam.

HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Retain These Instructions for Future Reference Contents Component List Opening the CartonUsing Steam on Delicate Materials Safety RulesAbout Your Earlex Steam Caddy Introduction Power & Hygiene of SteamWhere to USE Your Steam Cleaner Choosing how to use your Steam Caddy Three Steam Cleaners in ONEGET to Know Your Steam Cleaner Features Guide Preparing Your Steam Caddy for USE Fitting the Bonnet 31 to the Floor Cleaner Using the Main AttachmentsFloor Cleaner Window/Tile Cleaner Uses for your Floor CleanerFitting the Bonnet 32 to the Upholstery Cleaner Filling the Water Tank Getting StartedSteam Release Button Cleaning and MaintenanceSwitch the Steam Caddy on Boiler DE-SCALINGStoring the Unit CaddySpare Parts Trouble ShootingEC Declaration of Conformity GuaranteeMains Connection

IS2000 specifications

The Earlex IS2000 is a versatile steam wallpaper stripper that has gained a reputation for its efficiency and effectiveness in the realm of home improvement and renovation. Designed to tackle the often tedious task of removing wallpaper, the IS2000 combines innovative technology with user-friendly features, making it a favorite among DIY enthusiasts and professionals alike.

One of the standout features of the Earlex IS2000 is its rapid steam generation capability. It heats up quickly, producing steam in just a few minutes, which allows users to start their projects without prolonged waiting periods. The powerful steam output enables the device to penetrate deeply into the wallpaper, loosening the adhesive and making removal significantly easier.

The IS2000 is equipped with a large water tank that can hold up to 5 liters. This generous capacity allows for extended operation without the need for frequent refills, making it ideal for larger jobs or multi-room projects. The unit also features an integrated steam plate and a hose that provides exceptional reach, enabling the user to access hard-to-reach areas with ease.

In terms of safety, the Earlex IS2000 comes with a number of important features. It is designed with a safety cut-off, which prevents overheating, ensuring that the user can operate the device with peace of mind. The steam hose is also insulated to protect against burns, making it safer to handle during extended use.

The lightweight design of the IS2000 enhances its maneuverability, allowing users to work for longer periods without experiencing fatigue. Additionally, the compact size makes it easy to store when not in use, which is an important consideration for those with limited space.

The Earlex IS2000 is also praised for its versatility. In addition to wallpaper removal, it can be used for a variety of other applications, such as loosening paint, upholstery work, and even disinfecting surfaces, thanks to its high-temperature steam.

Overall, the Earlex IS2000 stands out as a powerful and practical tool for anyone looking to undertake wallpaper removal or other steam-related projects. With its combination of speed, efficiency, safety features, and versatility, it proves to be an invaluable asset in the toolkit of both amateurs and professionals alike.
Top Page Image Contents