Using the Main Attachments, Floor Cleaner

USING THE MAIN ATTACHMENTS

Floor Cleaner (27)

Some carpets have stain resistant treatments, which may be affected by steam cleaning. Try cleaning a small area of carpet that is normally unseen, then allow 24 hours to check whether there have been any unusual effects on the carpet, e.g white streaks. If this happens DO NOT CONTINUE TO USE – Check with your carpet supplier for further advice.

On wax treated surfaces and floors the sheen may be removed by steam. Do not use on unsealed wood as this could destroy the integrity of the wood grain. Always check a small area first or check with the manufacturer.

The Floor Cleaner can be used in a number of ways and for a variety of purposes. You may need to experiment to find the best method of cleaning. The three options of use are:

a)With bristles extended – no Bonnet being used

b)With bristles extended and a Bonnet (31) in use

c)No bristles extended and a Bonnet (31) in use

In general, option (a) is likely to be used on stone or tiled floors where there are areas needing more vigorous action to clean thoroughly. This may, for instance, be the grouting between tiles that requires the bristles to help clear out dirt or grime.

Option (b) would be the normal use for any stone, tiled or solid floor.

Option (c) is for normal carpeted areas.

The Earlex Steam Caddy Floor Cleaner can be changed from having its bristles extended to not extended. This is achieved by repositioning the centre section of the Floor Cleaner. You will see in this centre section there are 2 finger grip cut outs which enable you to remove the section completely. Once removed, rotate the section through 180˚ and re-locate it in the Floor Cleaner. You will see the position of the bristles has changed.

Fitting the Bonnet (31) to the Floor Cleaner (27)

To fit the Bonnet, open the two yellow clips. Lay the Bonnet on a flat surface and place the Floor Cleaner in the centre of the Bonnet. Fold the Bonnet around the Floor Cleaner with the nap facing outwards and secure it in position by re-fixing the clips in place, making sure the Bonnet is pulled tight over the face of the Floor Cleaner.

Used correctly the Floor Cleaner will refresh and brighten your floor by removing surface grime, pet hairs etc. It is not a dirt extraction system, so it cannot remove deep stains or grease. Before using the Floor Cleaner, use a vacuum to pick up the larger dirt and grit particles. If there are stains on the carpet, pause for a few seconds to allow the steam to penetrate but do not use excessive steam as this could result in watermarking or permanent staining.

IMPORTANT - When cleaning hard floors there may be a small residue of water that will ultimately evaporate. If preferred, use a dry cloth attached to the Floor Cleaner (steamer turned off) and wipe area dry.

DO NOT SOAK THE SURFACE! - Glide the Floor Cleaner over the surface. It is generally better and easier, to pull rather than push the head across heavy pile carpets. Do not scrub the surface unless this is on tiles or stone.

Used Bonnets can be washed out and re-used. Spare Bonnets are available from Earlex Limited or you can make your own using Terry Toweling material.

HELPLINE NUMBER - 01483 454666. CALL FIRST IF YOU HAVE ANY PROBLEM

IS2000 specifications

The Earlex IS2000 is a versatile steam wallpaper stripper that has gained a reputation for its efficiency and effectiveness in the realm of home improvement and renovation. Designed to tackle the often tedious task of removing wallpaper, the IS2000 combines innovative technology with user-friendly features, making it a favorite among DIY enthusiasts and professionals alike.

One of the standout features of the Earlex IS2000 is its rapid steam generation capability. It heats up quickly, producing steam in just a few minutes, which allows users to start their projects without prolonged waiting periods. The powerful steam output enables the device to penetrate deeply into the wallpaper, loosening the adhesive and making removal significantly easier.

The IS2000 is equipped with a large water tank that can hold up to 5 liters. This generous capacity allows for extended operation without the need for frequent refills, making it ideal for larger jobs or multi-room projects. The unit also features an integrated steam plate and a hose that provides exceptional reach, enabling the user to access hard-to-reach areas with ease.

In terms of safety, the Earlex IS2000 comes with a number of important features. It is designed with a safety cut-off, which prevents overheating, ensuring that the user can operate the device with peace of mind. The steam hose is also insulated to protect against burns, making it safer to handle during extended use.

The lightweight design of the IS2000 enhances its maneuverability, allowing users to work for longer periods without experiencing fatigue. Additionally, the compact size makes it easy to store when not in use, which is an important consideration for those with limited space.

The Earlex IS2000 is also praised for its versatility. In addition to wallpaper removal, it can be used for a variety of other applications, such as loosening paint, upholstery work, and even disinfecting surfaces, thanks to its high-temperature steam.

Overall, the Earlex IS2000 stands out as a powerful and practical tool for anyone looking to undertake wallpaper removal or other steam-related projects. With its combination of speed, efficiency, safety features, and versatility, it proves to be an invaluable asset in the toolkit of both amateurs and professionals alike.