Mains Connection, Guarantee | Earlex IS2000 instruction

IF YOU REQUIRE FURTHER ASSISTANCE PLEASE CONTACT OUR HELPLINE ON

Tel: 01483 454666 Fax: 01483 454548 email: enquiries@earlex.co.uk Opening Hours: Monday – Friday 08:30 – 18:00 (Except Bank Holidays)

MAINS CONNECTION

Your unit has been supplied with a non re-wireable plug fitted to the mains lead. A non re-wireable plug is easily identified because it has a fuse holder set in its base. Please read the following safety instructions, which refer to the use of a non re-wireable plug.

1)If the non re-wireable plug is cut off from the mains lead, the plug must be immediately disposed of, safely. It must NEVER be plugged into a 13amp socket.

2)NEVER under any circumstances use the appliance without the fuse cover fitted. This is the little cover fixed into the base of the plug to hold the fuse in place.

3)If you lose the fuse cover then please contact any electrical dealer for a replacement or ring our helpline.

4)A replacement fuse must be rated at 10amp. The fuse must be manufactured and approved to BS1362.

5)IF IN ANY DOUBT PLEASE CONSULT AN ELECTRICIAN.

If you need to fit a re-wireable plug to the Mains Lead, this should be done in accordance with the wiring instructions shown below, and will need to be fitted with a 10amp fuse. If in doubt please consult an electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED. If you are using an extension lead it must be rated at a minimum of 10amps and fully unwound. Do not operate with a lead rated at less than 10amps as this will cause premature failure of the elements and will not be covered by the guarantee. As the colours of the wires in the Mains Lead of the unit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows;

The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E, or by the earth symbol, or coloured green, or green and yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

GUARANTEE

This product is guaranteed for a period of 12 months against faulty materials and workmanship. Whilst every possible care is taken by Earlex to ensure that our products leave the factory in good working order, Earlex cannot under any circumstances accept liability for problems or damage caused by their subsequent use. It is the responsibility of the user to ensure the surfaces to be treated or cleaned are suitable for steam. This guarantee does not affect your statutory rights. This guarantee excludes the use for hire purposes. In the event of a fault occurring please contact our helpline before returning the unit to our Service Department at the address below together with a copy of your purchase receipt. All repairs will be dealt with speedily.

British Registered Design: No. 3014006 : European Community Registered Design No. 000115365

Australian Registered Design No. 155594 : Chinese Registered Design No. 200430001190.6

International Patent GB2004/02177 : Canadian Registered Design No. 105550

US Registered Design No. 29/196.773 : Japanese Registered Design No. 2004-2805

EC DECLARATION OF CONFORMITY

We declare that the IS2000 conforms to: 73/23/EEC, EN60335-2-54, 89/336/EEC, EN55014-1-2,

EN61000-3-2, 3-3.

Tim Hopper - Technical Director

Earlex Ltd, Earlex House, Moorfield Road, Guildford, Surrey GU1 1RU. UK

Tel: +44 (0) 1483 454666	Fax: +44 (0) 1483 454548 email: enquiries@earlex.co.uk Website: www.earlex.co.uk
© 2004 Earlex Ltd	Code M0500 07/04

IS2000 specifications

The Earlex IS2000 is a versatile steam wallpaper stripper that has gained a reputation for its efficiency and effectiveness in the realm of home improvement and renovation. Designed to tackle the often tedious task of removing wallpaper, the IS2000 combines innovative technology with user-friendly features, making it a favorite among DIY enthusiasts and professionals alike.

One of the standout features of the Earlex IS2000 is its rapid steam generation capability. It heats up quickly, producing steam in just a few minutes, which allows users to start their projects without prolonged waiting periods. The powerful steam output enables the device to penetrate deeply into the wallpaper, loosening the adhesive and making removal significantly easier.

The IS2000 is equipped with a large water tank that can hold up to 5 liters. This generous capacity allows for extended operation without the need for frequent refills, making it ideal for larger jobs or multi-room projects. The unit also features an integrated steam plate and a hose that provides exceptional reach, enabling the user to access hard-to-reach areas with ease.

In terms of safety, the Earlex IS2000 comes with a number of important features. It is designed with a safety cut-off, which prevents overheating, ensuring that the user can operate the device with peace of mind. The steam hose is also insulated to protect against burns, making it safer to handle during extended use.

The lightweight design of the IS2000 enhances its maneuverability, allowing users to work for longer periods without experiencing fatigue. Additionally, the compact size makes it easy to store when not in use, which is an important consideration for those with limited space.

The Earlex IS2000 is also praised for its versatility. In addition to wallpaper removal, it can be used for a variety of other applications, such as loosening paint, upholstery work, and even disinfecting surfaces, thanks to its high-temperature steam.

Overall, the Earlex IS2000 stands out as a powerful and practical tool for anyone looking to undertake wallpaper removal or other steam-related projects. With its combination of speed, efficiency, safety features, and versatility, it proves to be an invaluable asset in the toolkit of both amateurs and professionals alike.