Hoover WindTunnelTM Belt replacement, Replacing flat belt, Installing bulb and replacing lens

Page 10

3 - 8

Installing bulb and replacing lens

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Excessive force is not required.

Reposition lens and secure with the two screws.

Belt replacement

The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sure they are in good condition.

The flat (wide) belt is described below; the other is described under “Brush roll replacement”.

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

To check the flat belt, remove bottom plate as shown in Fig. 3-9. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for: Flat belt - HOOVER part No. 38528035.

3 - 9

A

Replacing flat belt

Removing bottom plate

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

Place handle in low position and turn cleaner over so bottom side is up.

Remove the 4 screws as shown with a Phillips screw driver.

Lift off bottom plate (A).

3 - 10

3 - 11

3 - 12

 

 

 

D

B

 

 

C

 

C

Removing belt

Positioning back of belt

Positioning front of belt

Flat belt (B) operates the self-propel fea- ture and indirectly drives the brush roll.

Remove used belt (B) from large pulley

(C) and discard.

With lettering on outside of belt, slide new belt over motor shaft (D).

Place other end of belt over large pulley

(C)while rolling the pulley in direction shown.

3 - 13

Replacing bottom plate

Reposition bottom plate and 4 Phillips head screws. Tighten screws securely.

B rush roll re p l a c e m e n t

3 - 14

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

When brush roll brushes are worn, it should be replaced.

To check condition of brushes, move the edge of a card across bottom plate while turning brush roll. To maintain cleaning effectiveness, replace brush roll if brushes do not touch card.

What to buy

When purchasing a new brush roll, ask for HOOVER part No. 48414069.

10

Image 10
Contents Self-Propelled English pp.1-13operating cleaner Fill in and retainCarton contents IndexSelf-Propelled Vacuum cleaner isNow that your new WindTunnelSelf-propel feature Cleaner descriptionON-OFF Switch Transporting cleanerHandle positions Carrying cleanerCarpet height adjustment Brush roll controlCleaning tools Attach wand and tools Stair CleaningCheck bag indicator Extra reach hoseSecondary and final filters ReplacementHeadlight Replacing flat belt Belt replacementInstalling bulb and replacing lens Replacing bottom plateReplacing brush roll ServiceEdge groomer replacement Replacing edge groomersThermal protector Hoover Cleaning PerformanceLubrication Clearing blockagesFull One Year Warranty Domestic Use

WindTunnelTM specifications

The Hoover WindTunnel™ vacuum cleaner stands out in the realm of home cleaning solutions, offering advanced technology and an array of features designed to provide effective performance and convenience. This innovative vacuum is engineered to capture dirt and debris efficiently, ensuring a clean and healthy living environment.

One of the most notable features of the Hoover WindTunnel™ is its distinct WindTunnel technology. This system utilizes multiple air channels that create a powerful suction force. By generating a continuous airflow, it effectively lifts and removes hidden dirt from deep within carpets and upholstery, making it an ideal choice for households with pets or high foot traffic.

The Hoover WindTunnel™ also incorporates a multi-cyclonic separation system. This technology helps to maintain suction power over time by separating dirt and debris from the air, thus preventing clogs in the filters. As a result, users experience consistent cleaning performance without the need for frequent maintenance or filter replacements.

In addition to powerful suction, this vacuum features a range of attachments designed for versatility and effectiveness on various surfaces. The included crevice tool is perfect for reaching tight spaces, while the upholstery nozzle helps to clean couches and drapes. Furthermore, the dusting brush is ideal for delicate surfaces, ensuring that every corner of your home remains dust-free.

Another significant characteristic of the Hoover WindTunnel™ is its user-friendly design. It typically includes an adjustable height feature, allowing users to seamlessly transition between carpets and hard floors. With its lightweight construction, maneuverability is effortless, making cleaning less of a chore.

For added convenience, many models in the Hoover WindTunnel™ line are equipped with a bagless dirt cup, simplifying the process of emptying debris without the mess of traditional bags. Some models may also include HEPA filtration systems, which are essential for capturing allergens and fine dust particles, providing relief to allergy sufferers.

In summary, the Hoover WindTunnel™ vacuum cleaner blends powerful suction, advanced cyclonic technology, and versatile design, making it an exceptional choice for maintaining a clean home. With its innovative features and convenience, this vacuum cleaner not only promises superior cleaning performance but also enhances the overall user experience, catering to the diverse needs of modern households.