Secondary and final filters, Headlight

3 - 2	3 - 3

Secondary and final filters

3 - 4

Removing and installing filter	Replacing bag door
b a g	Reposition bag door by placing tab on
Grasp filter bag collar (A) and pull collar	Reposition bag door by placing tab on
Grasp filter bag collar (A) and pull collar	bottom of door into opening (C).	Cleaning secondary
from tube (B).	Press top of door to snap securely shut.	Cleaning secondary
from tube (B).		filter
Note: Do not clean out old filter bag and

		Disconnect cleaner from electrical
reuse. Discard used filter bag.		Disconnect cleaner from electrical
Hold new filter bag as shown. Align open-		outlet.
Hold new filter bag as shown. Align open-		The secondary filter (A), located
ing in filter bag with (B).		The secondary filter (A), located
Push (A) firmly onto (B).		behind the grill in the bottom of bag
Push (A) firmly onto (B).		compartment, protects the motor from
Tuck in filter bag.		compartment, protects the motor from
Tuck in filter bag.		dirt particles.
		If filter becomes dirty, pull off grill and lift
		out filter.
		Hand wash filter in cold water with mild
		detergent, then air dry.
		Reposition dry filter and grill.
		Should you want to replace this filter,
		ask for HOOVER part No. 38765019.

3 - 5	3 - 6	Check for debris accumulation by
3 - 5	3 - 6	removing bottom plate (Fig. 3-9) and
		looking in the channels (I) next to the
		brush roll (Fig. 3-18).
	C	Remove any accumulation.
		Reposition bottom plate (Fig. 3-13).
B		Headlight
		replacement

Replacing final filter

The final filter assists in the filtration process to return clean air to the room.

This pleated filter will become dirty and needs to be replaced about once a year to maintain efficient filtration. The 3 layer filter (some models) can be washed in the same manner as the secondary filter and reused.

To remove final filter, first open the door on the side of the cleaner (Fig. 3-5).

Grasp filter (B) and pull it straight out.

Reposition new filter by reversing this procedure.

The final filter can be replaced with any of the following filters.

3 layer, washable - HOOVER part No.

40110006

HEPA filter HOOVER part No. 43613022.

Do not operate cleaner without both the secondary and final filter in place.

How to reattach filter door

The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check brush roll chan- nels

Because your WindTunnel cleaner picks up so well, we strongly recom- mend you check for debris accumula- tion in the channels next to the brush roll when you check the filters. Removing this debris will help maintain you cleaner’s excellent pick up and suc- tion. Remove debris as follows:

Disconnect cleaner from electrical outlet.

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part N o .

2 7 3 1 3 1 0 1.

3 - 7

Removing lens

Disconnect cleaner from electrical outlet.

Using a Phillips screwdriver, remove the two screws as shown and lift off lens.

Continued 9

WindTunnelTM specifications

The Hoover WindTunnel™ vacuum cleaner stands out in the realm of home cleaning solutions, offering advanced technology and an array of features designed to provide effective performance and convenience. This innovative vacuum is engineered to capture dirt and debris efficiently, ensuring a clean and healthy living environment.

One of the most notable features of the Hoover WindTunnel™ is its distinct WindTunnel technology. This system utilizes multiple air channels that create a powerful suction force. By generating a continuous airflow, it effectively lifts and removes hidden dirt from deep within carpets and upholstery, making it an ideal choice for households with pets or high foot traffic.

The Hoover WindTunnel™ also incorporates a multi-cyclonic separation system. This technology helps to maintain suction power over time by separating dirt and debris from the air, thus preventing clogs in the filters. As a result, users experience consistent cleaning performance without the need for frequent maintenance or filter replacements.

In addition to powerful suction, this vacuum features a range of attachments designed for versatility and effectiveness on various surfaces. The included crevice tool is perfect for reaching tight spaces, while the upholstery nozzle helps to clean couches and drapes. Furthermore, the dusting brush is ideal for delicate surfaces, ensuring that every corner of your home remains dust-free.

Another significant characteristic of the Hoover WindTunnel™ is its user-friendly design. It typically includes an adjustable height feature, allowing users to seamlessly transition between carpets and hard floors. With its lightweight construction, maneuverability is effortless, making cleaning less of a chore.

For added convenience, many models in the Hoover WindTunnel™ line are equipped with a bagless dirt cup, simplifying the process of emptying debris without the mess of traditional bags. Some models may also include HEPA filtration systems, which are essential for capturing allergens and fine dust particles, providing relief to allergy sufferers.

In summary, the Hoover WindTunnel™ vacuum cleaner blends powerful suction, advanced cyclonic technology, and versatile design, making it an exceptional choice for maintaining a clean home. With its innovative features and convenience, this vacuum cleaner not only promises superior cleaning performance but also enhances the overall user experience, catering to the diverse needs of modern households.