Maintenance and care
Brush roll and brush roll belt maintenance continued
Brush roll reset:
If larger debris becomes lodged in the foot of the unit and the brush roll shuts off, turn the unit off and remove the obstruction. Wait approximately 15 sec- onds for the motor to cool down before turning back on. Brush will function again after allowing time to cool down.
Brush roll belt replacement:
If the brush roll belt should break, call
Replacement instructions:
1. Turn power OFF (O). Remove foot 2. assembly from unit and turn over to access the brush roll belt.
2.Remove three Phillips head screws to remove the belt cover.
3. | Locate broken belt. |
|
4. | Replace belt. |
|
5. | Place brush roll back into foot of unit. | 3. |
|
6.Replace the belt cover and secure with three screws.
7.Attach foot assembly on unit.
Disposal of batteries
WARNING:
This product contains Nickel Metal Hydride (NiMH) rechargeable batteries. According to Federal and State regulations, removal and proper disposal of NiMH bat- teries is required. For removal of the batteries in your Lift- Off Floor & More stick vacuum see instructions below.
TM
If your
1.IMPORTANT: Unplug Charger.
2.Remove hand vac from unit and remove dirt cup from handle.
3.Remove (5) Phillips head screws on the
3.
5 screws
8
handle and cover.
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1