/I L-I ROI
Note: The white switch look above the ON/OFF switch, on th8 upper handle, holds the switch in the Off position and aids in proper assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed.
Place upper and lower handle sections on a flat surface, aligning rod sections. Push sections together firmly until they *click” and rod sections lock together. m. 1)
•Re carefui not to press against the gray rod extending from the lower handle. (Fig. 2)
HANDLE
Insert large rectangular end of cord into pocket in bottom of handle, with side marked “UP” visible. (Fig. 2) Make sure rectangular end is pushed into the handle as far as possible. Slide cord protector toward upper handle. (Fig. 2)
4