Hoover s3503 owner manual Crevice tool Furniture nozzle Dusting brush, Carrying handle, Hand grip

1.Tool storage tray: provides internal tool storage for crevice tool, furniture nozzle, and dusting brush.

2.Crevice tool

3.Furniture nozzle

4.Dusting brush

5.Cover: remove by lifting up top section of carrying handle and pulling forward.

6.Carrying handle

7.Extension wands: use with power nozzle. If added length is desired when using cleaning tools, add one or both wands to hose.

8.Spring latch: locks extension wands together or locks wand to nozzle or tool.

9.Power nozzle: automatically adjusts to different carpet pile heights.

10.Large wheels: provide easy towing, when hose is used to pull cleaner over carpet, area rugs and door sills.

11.ON-OFF control: located on top of cleaner for convenient foot operation.

12.Cord rewind control: step on control to rewind cord for storage.

Hold plug until cord is rewound.

13.Cord clips: fasten nozzle cord to extension wands.

14.Receptacle: connect power nozzle cord underneath hand grip.

15.Hand grip

16.Suction regulator: close for maximum suction; open if power nozzle is difficult to push on some carpet or if lightweight rugs or draperies are being cleaned.

17.Plastic latch ring: rotate to lock hand grip to extension wands or cleaning tools.

Operate cleaner only at voltage specified on data plate on bottom of cleaner.