![](/images/new-backgrounds/1040540/4054011x1.webp)
How to assemble
1. Connect hose
Insert hose end with cord into opening of cleaner, lining up largest projection on hose with largest notch of opening. Turn hose to the right to tighten.
When hose is attached properly, hose cord plug will reach to receptacle on cleaner.
Insert plug as deeply into the receptacle as possible.
To disconnect hose, first remove hose cord plug from receptacle. Then, depress latch and turn hose to the left.
2.Attach power nozzle and extension wands
Attach wand to power nozzle by fitting button projection on nozzle connector into opening near end of wand. Be sure nozzle is locked in place.
To release, press down on center of latch and remove nozzle.
HOSE CORO PLUG | A |
|