Cleaningthe ExhaustFilter

NOTE:Thisis located on the rear of the vacuum cleaner .

Step I

Releasethe exhaust filter cover and remove the cover as shown . Removethe filter by pulling the tab towardsyou .

Step ll

Tap the pleated filter on the inside of a trash can to remove excessdust and dirt .

WARNING:Do not apply water to pleated filter.

N OTE: Replace filter if any sign of d a m a g e .

Steplll

Once c'leaned return the exhaust filter to the vacuum cleaner . Replacethe exhaust filter cover before restartingthe vacu - um cleaner .

What to buy

When purchasinga new HEPA Exhaust Filter, ask for HOOVERpart no . AH400to.

PowerNozzlebelt replacement

The belt in your power nozzle drives the agitator . lt has been designedspecifically for use in this cleanerand is important for effective operation .

What to buy

There are other belts manufactured that are similarin shapeand size,but are not designed for the HOOVERpower nozzle.

Such belts do not operatethe agitator cor - rectly and may createstresswhich could

damageyour power nozzle. Use only a genuine HOOVERBelt part no . AH20000 when a belt replacementis necessary .

Whento replace

The belt should be checkedfrom time to time to be sure it is in good condition . To check,remove the hood (seefollowing sec - tion) . Replacethe belt if it is stretched,cut, or broken.

Howto replace

Step I

Disconnectcleaner from e'lectrical outlet and discon - nect power nozzle from extension

w a n d .

To remove hood, turn nozzle over and unscrew the

7recessedPhillips head screws .

Stepll

Return nozzle to original posi - tion . Lower Quick Disconnectby depressingdown the handlerelease pedal and lift off the hood .