Hoover FH40160 owner manual Storage, Storing Cleaner

Page 12

8. storage

Storing Cleaner

Turn cleaner OFF and disconnect from electrical outlet.

Empty and rinse Clean Water Solution Tank and Dirty Water Tank. Allow to air dry.

Make sure that nothing is pressing on the nozzle squeegee.

Do not store cleaner on a wood surface unless cleaner is completely dry.

Store approriately indoors in a dry place. Do not expose machine to freezing tempuratures.

Water will drip from the brushes and underside of the product after use and may puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use A) do not leave the product on wood and laminate surfaces and remove to a hard surface and B) place unit on absorbent material (such as a towel) to soak up drips.

12

Image 12
Contents Manual Contents Important Safety Instructions Grounding Instructions Features FeaturesCleaner Assembly HOW to ASSEMBLeAttach handle General operation Turn cap upside down to serve as a measuring capHOW to USE How to emptyON/OFF switch Handle release pedalHow to clean Recommended cleaning sequenceTilt tank straight into position until latch snaps in place Vacuum floor to remove loose dirt, hair and debrisSwitch to dry mode to pick up any remaining dirty water Picking up spillsMaintenance Cleaning the nozzleCleaning the brushes Storing Cleaner StorageTroubleshooting Cleaning Products Hoover Cleaning Product GuideService If you need further assistanceWarranty Limited TWO Year Warranty