HOW to USE, How to empty, Handle release pedal

4. HOW TO USE

Handle release pedal

4.1		Step on pedal (A) to
4.1		lower		handle		to
		operating			position.
		Handle		does	not	lock
		into	a	single	position,
		but	“floats”		to	allow
		convenient operation.
	A

ON/OFF switch

4.2

Push switch (A) once to turn cleaner ON. Push switch again to turn cleaner OFF.

Transporting
4.3	4.4

Cord Storage

4.5

To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.

The cleaner may also be lifted using the carry handle (B) on front of cleaner.

Wrap the cord clockwise around the two cord handle hooks (C). For convenient storage, attach the plug end to the cord.

5. How to empty

Dirty Water Tank

(left side when facing unit) When to Empty

An automatic suction shut-off is built into the dirty water tank to prevent the tank from overflowing.

When the shut-off activates, the cleaner will not pick up water or debris and the sound of the motor will change. The dirty water tank is full and must be emptied.

How to Empty

5.1To remove tank, press down on release button

(A)and pull tank straight out.

5.2Release tabs (B & C) on each side of the dirty water tank to unlock the top portion of the tank.

! WARNING !

To reduce the risk of personal injury, unplug before cleaning or servicing. Do not use cleaner without tank in place.

5.1	5.2
A	B	C
	B	C