1. Assembling cleaner
Carton contents
It is extremely important to read and follow all the assembly steps in order.
AB
F
C
G
D
E
H
Remove all parts from carton and identify each item shown. Make sure all parts, especially small items, such as G and F, are located before dis- posing of cardboard packaging.
A. Upper handle B. Lower handle
C.Cord
D.Dirt cup assembly
E.Cleaner body
F. Handle bolt and nut pack- et (One extra nut included) G. Dirt cup screws (2)
H. Dirt cup support
Step 1 Assemble handle
C
Note: The white switch lock above the ON/OFF
(A)switch helps in the assembly of your cleaner.
Assembly can be continued if the switch lock is miss- ing. However, do not remove the switch lock until assembly is completed.
B |
A |
Align upper handle and lower handle as shown.
Place upper (B) and lower (C) handle parts on a flat surface, aligning rod sections (D). With hands on sides of handle, push parts together firmly until they “click” and rod sections lock together.
*Do not press against the grey rod extending from the lower handle shown in Fig.
Step 2 Attach cord
“UP” | F |
| “UP” | |
|
| |||
E |
|
|
| UP |
|
|
|
| |
|
|
| G | E |
|
|
|
|
Insert large rectangular end of cord into pocket in bot- tom of handle, with side marked “UP” visible.
Make sure rectangular end is pushed into the handle as far as possible.
Slide cord protector (F) toward upper handle (G).