Hoover 1170 manual Cleaning Tools

E CLEANING TOOLS

(See Page 4 for setting Suction Control Dial when using tools).

1.TUFFLEX HOSE Double vinyl reinforced with nylon mesh for long, trouble-free life. The light flexible hose has a vinyl tab, so it can be hung on the cleaner or on a hook in a closet.

2.TELESCOPING WAND When you require extra length for cleaning bare floors or hard-to-reach places, attach the telescoping extension wand. To lengthen the wand, press down on the plastic latch and extend wand until it locks in place. To shorten, use opposite procedure. (Fig. 2.)

3.FLOOR BRUSH For hard surface floors and carpeted stairs.

4.UPHOLSTERY NOZZLE For upholstered furniture, draperies, tapestries, mattresses, clothing, automobile interiors, stairs.

5.DUSTING BRUSH For carved furniture table tops, books, lamps, light fixtures, Venetian blinds, registers, baseboards.

6.CREVICE TOOL For upholstered furni- ture, edges of wall-to-wall carpeting, radiators, dresser drawers.

To Connect Hose To Cleaner, Insert hose con- nector in opening below dial. Turn hose connector to either direction until it locks in place. (Fig. 3.) TO Connect Tools. To either the telescoping wand or hose, push the attachment into place making sure the button on the attachment is locked in place. To release, press down on plastic spring latch and remove. (Fig. 4.)

To Store Tools. The vinyl tool kit has been designed so the tools can be packed inside and the hose attached, by strap, on outside. The kit has two slots located near the top for ease in hanging on the cover latch of the cleaner or on a hook in the closet. (Fig. 5.)

While moving furniture, the hose can be conven- iently hung on the handle. (Fig. 6.)

To Clean Tools. To clean the hose, wipe off dirt with a cloth dampened with a liquid detergent. Use a damp cloth to remove the detergent. Clean- ing tools can be washed in warm water with a detergent. Rinse and let dry before using.

5