Using Your Kambrook Captiv12V Portable Vacuum Cleaner
Before First Use
Remove any promotional material from the portable vacuum cleaner.
When unpacking the vacuum, check to see you have received the charger, charging base and brush tool before discarding the packaging.
WARNING: Before first use, charge your portable vacuum cleaner for at least 24 hours. Make sure that the on/off switch is turned to the ‘OFF’ position before charging. Otherwise the portable vacuum cleaner will not charge.
To Wall Mount the Portable Vacuum Cleaner
Follow these steps when mounting the base:
1.Pick a convenient position within 1m of an electrical outlet. If the Charging Base will be mounted closer to an outlet, wrap any excess cord on the side of the Charging Base.
2.Place the Charging Base against the wall in the desired location and mark the centre of one of the holes.
3.Drill a 5mm diameter hole through the centre of the hole. Push a Plastic Wall Anchor into the drilled hole.
4.Insert one of the included screws and turn it until the screw head is 3mm above the wall surface.
5.
6.Slide the Charging Base into place.
Charging Base
The Charging Base can be mounted vertically or placed on a horizontal surface such as a counter or shelf.
Fig. 1
Fig. 2
NOTE: The Charging Base should be mounted on the wall so that the pick up canister is pointed up when the Portable Vacuum Cleaner is placed in the charging base.
7
KHV200R_IB_C10_FA.indd 7 | 1/12/10 2:02 PM |
