Cleaning Tips
The Portable Vacuum Cleaner will be more effective at cleaning up spills if the following procedures are followed:
Carpet Clean Ups
1.Immediately vacuum up as much of the spill as possible.
2.For oily spills, work some low sudsing carpet shampoo into the area according to the directions on the shampoo container (do not use solvent based cleaners). Vacuum shampoo and spill residue, then proceed to step 3. For water soluble spills, dampen the spill area using a spray bottle of cold, clean water. Be careful not to saturate the carpet.
3.Work water into the nap of the carpet.
4.Vacuum water and spill residue.
5.Repeat the above procedure if necessary.
6.Cover the cleaned spill area with several layers of paper towel or a cloth towel. Press on the towels several times to soak up the moisture. Brush up the nap of the carpet.
Upholstery Clean Ups
1.Immediately vacuum as much of the spill as possible.
2.Follow your furniture manufacturer’s instructions for spot cleaning upholstery.
NOTE: Never use flammable cleaners with the vacuum.
10
Emptying/Cleaning Filter and Canister
Liquids, dirt and debris (wet and dry) picked up by the Portable Vacuum Cleaner will collect in the Filter and Canister. To empty/clean these parts, please follow these steps:
1.Holding the Canister with one hand and the Handle/Housing with the other, depress the Canister Latch and swing the Canister away from the Handle/Housing.
Fig. 6
2.While holding the Canister in one hand, remove the Filter and Filter Cover with the other hand by grasping the metal pull handle on the sides of the Filter Cover with your fingers. Empty any dirt, debris, or liquid from the Canister, Filter and Filter Cover into the sink or waste basket.
Fig. 7
KHV200R_IB_C10_FA.indd 10 | 1/12/10 2:02 PM |
