3.Rinse or hand wash the Filter, Filter cover and Canister with water (if needed, with warm soapy water).
4.Allow the Filter, Canister and Filter Cover to dry. Then reinsert the Filter and Filter Cover into the Canister and reattach the Canister to the Handle/Housing.
Fig. 8
WARNING: Never immerse the handle or housing in water.
Care and Maintenance
Always remove the Portable Vacuum Cleaner from the Charging Base or disconnect from Charger before cleaning.
Always unplug the Charger from the power point before cleaning the Charger and Charging Base.
Always switch the Portable Vacuum Cleaner off, prior to cleaning the Canister, Filter and Filter Cover.
To clean the outside of the unit, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.
To clean filter and canister refer to emptying/ cleaning filter and canister section [page 10]
11
KHV200R_IB_C10_FA.indd 11 | 1/12/10 2:02 PM |