BRUSHROLL: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.13Turn vacuum over so bottom side is facing up. Rotate red upper latch (A) counterclockwise.
4.14Slide red lower latch (B) to the unlock position.
4.15Pivot out bottom plate and remove any debris and/or hair from brushroll.
4.16Reposition bottom plate, aligning the three tabs along front edge of nozzle guard with the three slots in nozzle. Rotate back into position. Slide red lower latch to Lock position, and rotate red upper latch clockwise.
4.13 | A |
| |
4.15 |
|
4.14 |
B |
4.16 |
HOSE: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.17To remove hose for tool use, press the hose release button (A) and pull hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean out hose as they can cause damage. To lock back into place, push hose into hose tube until you hear a click.
4.17 |
A |
Powered Hand Tool: How to Clean | ||
(Tool varies per model) | 4.18 A | |
! CAUTION | ||
! |
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.18 Turn tool so bottom faces up. Rotate the latches (A) on either side of tool.
4.19Remove bottom plate (B).
4.20Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front edge of tool. Rotate latches back into locked position.
4.19 B
4.20 |
11Actual model may vary from images shown.