Before YOU Start Check the Voltage | Electrolux Z9120 specs

BEFORE YOU START

CHECK THE VOLTAGE

Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.

CONNECTING TO YOUR ELECTRICITY SUPPLY

Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.

In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be replaced by a

13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured insert on the base of the plug.

If difficulty is experienced in obtaining a replacement, contact Electrolux Customer Services on 08445 614 614. (Calls to this number will be charges at 5p per minute at all times from a ‘BT Landline’)

In no circumstances must the plug be used without a correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in another part of your home.

The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.

As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or green-and- yellow. This cleaner is double insulated and no earth connection is necessary.

It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.

	Fuse	13 Amp Fuse
		E
	Cover

N L

Fuse	Blue	Brown

Cord

Clamp

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product

Z9120 specifications

The Electrolux Z9120 is an innovative vacuum cleaner designed to meet the varied cleaning needs of modern households. With its user-friendly design and powerful performance, this model stands out in the crowded market of home appliances.

One of the key features of the Z9120 is its powerful suction capability. Equipped with a robust motor, this vacuum effectively picks up dirt, dust, and debris from carpets and hard floors alike. The adjustable suction settings allow users to optimize performance based on the surface being cleaned, ensuring thorough cleaning without damaging delicate fabrics.

Another significant characteristic of the Electrolux Z9120 is its lightweight design. Weighing in at just under eight pounds, this vacuum is easily maneuverable. Its compact size makes it convenient for storage in tight spaces, such as closets or small apartments. The ergonomic handle adds to user comfort while facilitating easy transportation from room to room.

The Z9120 also incorporates advanced filtration technologies. The multi-stage filtration system captures fine dust particles and allergens, contributing to better indoor air quality. The HEPA filter is especially beneficial for allergy sufferers, as it traps 99.97% of particles with a size of 0.3 microns or larger. This ensures that the air released back into the environment is clean and fresh.

Convenience is another hallmark of the Electrolux Z9120. The vacuum features a generous cord length, allowing for extended reach without frequently changing power outlets. Additionally, its large dust capacity minimizes the need for frequent emptying, saving users time during their cleaning routine. The easy-to-empty dust canister further enhances user convenience, making the maintenance of the vacuum hassle-free.

Accessories play a crucial role in the appliance’s versatility. The Z9120 comes equipped with several attachments designed for various cleaning tasks, including a crevice tool for hard-to-reach areas and a brush nozzle for upholstery. This adaptability makes the vacuum suitable for an array of cleaning challenges, from deep cleaning carpets to maintaining hardwood floors.

In summary, the Electrolux Z9120 is an outstanding choice for anyone seeking an efficient and convenient vacuuming solution. With powerful suction, advanced filtration systems, and user-friendly features, it effectively tackles a wide range of cleaning tasks, making it an essential addition to any home.