Maintenance

B CD

Caution: Turn off the switch and unplug the electrical cord before maintenance. Important: Improper installation of the brush roll or brush roll belt could cause carpet or cleaner damage.

How to Replace the

HEPA Filter Assembly

(Filter Code EF107)

1.Pull down on the filter assembly latch to release.

2.Pivot the filter away from the machine and remove. Install new filter by aligning the tabs at the bottom of the filter with the slots on the exhaust area of the cleaner and snap into place. Note: some filters are washable and can be cleaned by rinsing the assembly with warm water. Be sure the filters are completely dry before installing back into the cleaner. These filters are identified by the word washable on the side of the frame.

Brush Roll Motor

Protection Reset

3.The cleaner will automatically shut off the brush roll motor if the brush roll stalls. This will be indicated by a red light on the base near the handle release. To reset the motor, clear any obstruction to the brush roll and press the reset switch.

How to Service The Brush roll (Belt Code ZE107)

Caution: Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.

4.Take out the two screws securing the sole plate and remove.

5.Grasp both ends of the brush roll and pull straight out of the machine.

6.Slide the pulley end of the brush roll through the belt. Reverse the steps to reinstall the brush roll making sure the end caps are properly positioned the fully seat into the base.

How to Replace Brush Strips

7.From the non-pulley end, unscrew locknut

(A).and remove end cap (B). Grasp outer sleeve and twist bearing retainer (C) counterclockwise to remove. Pull outer sleeve (D) off of remaining assembly. Pull out worn brush strip (E) with pliers. Slide in new brush strip of same length (rounded end first). Fit track on either side of the brush strip into the brush roll slot. Replace the second strip from opposite end of brush roll. Replace shaft. Align indentation on bearing pulley retainer (F) with brush strips and press outer tube (D) into position. Screw bearing retainer

(C)into inner tube until tight. Reassemble the remainder of brush roll, making sure it turns freely, and secure into the base.

Air Path Clean-out

8.The cleaner is equipped with an air path cleanout, located at the turn into the dust bag. To access, open the dust bag cover and grasp the inlet assembly at the air path opening. Pull up on the hinged assembly to reveal the top of the air path. Clean out any debris and snap the inlet assembly back into place.

Pre-motor filter

Note: Check the pre-motor filter located under the dust bag. Check the filter each time the dust bag is changed. Clean or replace as needed. Shake filter to remove excess dust. If necessary, the filter can be cleaned by vacuuming with another cleaner or washing with mild detergent. Reinstall filter after completely dry.

Z9120 specifications

The Electrolux Z9120 is an innovative vacuum cleaner designed to meet the varied cleaning needs of modern households. With its user-friendly design and powerful performance, this model stands out in the crowded market of home appliances.

One of the key features of the Z9120 is its powerful suction capability. Equipped with a robust motor, this vacuum effectively picks up dirt, dust, and debris from carpets and hard floors alike. The adjustable suction settings allow users to optimize performance based on the surface being cleaned, ensuring thorough cleaning without damaging delicate fabrics.

Another significant characteristic of the Electrolux Z9120 is its lightweight design. Weighing in at just under eight pounds, this vacuum is easily maneuverable. Its compact size makes it convenient for storage in tight spaces, such as closets or small apartments. The ergonomic handle adds to user comfort while facilitating easy transportation from room to room.

The Z9120 also incorporates advanced filtration technologies. The multi-stage filtration system captures fine dust particles and allergens, contributing to better indoor air quality. The HEPA filter is especially beneficial for allergy sufferers, as it traps 99.97% of particles with a size of 0.3 microns or larger. This ensures that the air released back into the environment is clean and fresh.

Convenience is another hallmark of the Electrolux Z9120. The vacuum features a generous cord length, allowing for extended reach without frequently changing power outlets. Additionally, its large dust capacity minimizes the need for frequent emptying, saving users time during their cleaning routine. The easy-to-empty dust canister further enhances user convenience, making the maintenance of the vacuum hassle-free.

Accessories play a crucial role in the appliance’s versatility. The Z9120 comes equipped with several attachments designed for various cleaning tasks, including a crevice tool for hard-to-reach areas and a brush nozzle for upholstery. This adaptability makes the vacuum suitable for an array of cleaning challenges, from deep cleaning carpets to maintaining hardwood floors.

In summary, the Electrolux Z9120 is an outstanding choice for anyone seeking an efficient and convenient vacuuming solution. With powerful suction, advanced filtration systems, and user-friendly features, it effectively tackles a wide range of cleaning tasks, making it an essential addition to any home.