How to Use, Handle Adjustment, Power Switch

How to Use
2.
	Carpet
	Bare Floors
1.
Recommended
Settings	Example of Carpet

Position 1	Hard Floors
Position 2	Low Pile
Position 3	Medium Pile
Position 4	High Pile

10.

The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do not attempt to use the upright cleaner with the brush roll operating on bare floors, as damage to the floor covering may result.

HANDLE ADJUSTMENT

1.With the tip of the foot press down on the left portion of the handle release located at the left rear side of the cleaner. Move the handle and adjust it to the desired position. The unit can lay completely flat for cleaning under low furniture.

POWER SWITCH

2.The power switch is mounted on the top of the filer assembly on the left side of the cleaner. The power is off with the switch in the center position. Press the front of the switch for cleaning carpet, press on the rear of the switch to clean bare floors.

CLEANER HEIGHT SETTINGS

3.The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of carpet. With the power cord unplugged, set the adjustment to the

lowest setting for maximum cleaning. If during use, the cleaner is difficult to push, move the adjustment to the next height setting until the cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning.

Attachment Cleaning

4.For those models equipped with this option, the cleaner easily converts to attachment cleaning. The cleaner should be locked in the upright position. Remove the wand assembly and rotate the suction control valve towards the back of the cleaner to the hose position.

5.The valve should be in a horizontal position with the indicator pointing to the Hose setting.

6.To return to floor cleaning, rotate the valve towards the front of the cleaner until the indicator points to the Floor setting. Replace the wand into the lower retainer and secure into the wand clip. The cleaner is equipped with a wand device that prevents the wand from being stored until the suction control valve is set to the floor position.

7.To extend the cleaning reach of the wand, push the dark gray button nearest the handle and pull down on the outer wand section.

Reverse the process before returning the wand to the storage position.

8.The wand assembly has a built-in crevice tool and a permanently attached dusting brush. To engage the dusting brush press the dark grey button and slide the brush over the crevice tool until it locks. Reverse the process for storage.

Changing the dust bag

(Bag Code E87)

9.Pull up on the dust bag cover latch release and fully open the cover to expose the bag

10.Pull the dust bag straight up to remove. Insert new bag and close the cover making sure the latch locks into the handle. Note: the dust bag cover will not latch without a dust bag installed.

Z9120 specifications

The Electrolux Z9120 is an innovative vacuum cleaner designed to meet the varied cleaning needs of modern households. With its user-friendly design and powerful performance, this model stands out in the crowded market of home appliances.

One of the key features of the Z9120 is its powerful suction capability. Equipped with a robust motor, this vacuum effectively picks up dirt, dust, and debris from carpets and hard floors alike. The adjustable suction settings allow users to optimize performance based on the surface being cleaned, ensuring thorough cleaning without damaging delicate fabrics.

Another significant characteristic of the Electrolux Z9120 is its lightweight design. Weighing in at just under eight pounds, this vacuum is easily maneuverable. Its compact size makes it convenient for storage in tight spaces, such as closets or small apartments. The ergonomic handle adds to user comfort while facilitating easy transportation from room to room.

The Z9120 also incorporates advanced filtration technologies. The multi-stage filtration system captures fine dust particles and allergens, contributing to better indoor air quality. The HEPA filter is especially beneficial for allergy sufferers, as it traps 99.97% of particles with a size of 0.3 microns or larger. This ensures that the air released back into the environment is clean and fresh.

Convenience is another hallmark of the Electrolux Z9120. The vacuum features a generous cord length, allowing for extended reach without frequently changing power outlets. Additionally, its large dust capacity minimizes the need for frequent emptying, saving users time during their cleaning routine. The easy-to-empty dust canister further enhances user convenience, making the maintenance of the vacuum hassle-free.

Accessories play a crucial role in the appliance’s versatility. The Z9120 comes equipped with several attachments designed for various cleaning tasks, including a crevice tool for hard-to-reach areas and a brush nozzle for upholstery. This adaptability makes the vacuum suitable for an array of cleaning challenges, from deep cleaning carpets to maintaining hardwood floors.

In summary, the Electrolux Z9120 is an outstanding choice for anyone seeking an efficient and convenient vacuuming solution. With powerful suction, advanced filtration systems, and user-friendly features, it effectively tackles a wide range of cleaning tasks, making it an essential addition to any home.