Electrolux Z4700 Series manual Models equipped with Mini Turbo Nozzle, Maintenance Instructions

Page 14

Models equipped with Mini Turbo Nozzle

(on some models) A Mini Turbo Nozzle can be pur-

 

chased by contacting our Customer Care representa-

 

tives by calling 08445 614614. Call to this number will be

 

charged at 5p per minute all times from a BT Landline.

 

This convenient air-driven Turbo Nozzle is perfect for

 

use on upholstery, stairs and area rugs. Turbo Nozzle is

 

designed for use on end of hose.

Screws

Maintenance Instructions:

PROBLEM SOLVING Mini Turbo Nozzle

To remove any clogs or debris from around the brushroll or belt of the turbo, follow the steps below:

Step 1: To open Turbo Nozzle, unscrew the two (2) screws on the side (as pictured).

Step 2: Lift up the bottom housing.

Step 3: Clear blockage from brushroll area.

Step 4: To close align top and bottom housings and tighten with the two (2) screws.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Upright Vacuum Cleaner Owner’s Guide Z4700 SeriesImportant Safeguards Before YOU Start Thermal Cut OffGuarantee How To Assemble Quick ReferenceScrew holes, and then attaching it using the 2 short Assemble Cleaner base. Pivot the dust cup up against cleaner Cleaner Height Setting a How To UseON/OFF Switch Pedal Use Handle Release Stair CleaningHow To Use Accessories Routine Maintenance Brushroll Belt Periodic MaintenanceBrushroll To Change BeltClear Hose How to Check Clear Hose BlockagesThermal Cut-Off Maintenance Instructions Models equipped with Mini Turbo NozzleProblem Cause Solution 08445 Don’t Forget to Use Genuine Electrolux Parts
Top Page Image Contents