QUICK REFERENCE
HOW TO ASSEMBLE
Assemble completely before using.
1. Attaching or Removing Floor Nozzle.
|
| Align the lock button on the floor nozzle neck with the |
|
| hole in the receiving tube on the main body. Push the lock |
|
| button and slide the floor nozzle into the main body until |
|
| it clicks into place. Push the lock button in and pull on the |
QUICK |
| floor nozzle to remove it from the main body. |
2. | Attach Handle Grip. | |
| With the cord hook facing the rear of the cleaner, slide the | |
4. | handle into place over the plastic adaptor. | |
REFERENCE | Store Cord (using cord hooks). | |
| 3. | Attach Hose and Hose Holder. |
With the smaller side of the hose holder facing the front of the cleaner, insert into guide channels and snap into place. Insert the hose end with the guide tabs into the hose coupling and twist counter clockwise to lock.
Handle Grip 2
Cord Retainer
Handle Tube
3
Hose Holder 4
Off / Suction / Brushroll Switch
Dust Cup
HOW TO ASSEMBLE
Pull the electrical cord down around the lower cord hook, then wrap cord around upper and lower cord hooks. Fasten plug to electrical cord to prevent unwinding.
5. Store Unit.
Push the telescoping handle release button to lower the handle into its compact storage position. The handle is locked down when a click is heard.
Locked Brushroll
Indicator (Certain
models only)
Dust Cup
Release Button
| Clean Out |
|
Telescoping | Port (Open) | 6 |
|
Handle Release
Hose
Coupling
Clean Out
Port
Brushroll
Dusting
Brush
Cord Hooks 5
Hose
Actuator
Valve
Lock Button
1
Receiving Tube
Connector Pins
5