Electrolux Z430 Series manual HOW to USE, Power Switch, Hose and Attachments

HOW TO USE

Power Switch

1.This vacuum has a 3-position switch. O is Off, I is “Suction Only,” and II is “Suction and Brushroll.”

2.For bare floor cleaning use suction only (I). For carpet cleaning, use suction and brushroll (II).

The nozzle allows for low profile cleaning. Airflow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.

Hose and Attachments

CAUTION: Turn off the power switch and unplug the electrical cord to service.

1.Pull the hose end from the hose retainer at the bottom of the unit and the hose holder at the top.

2.Turn the hose actuator valve counter clockwise to direct air from the floor nozzle to the hose end.

3.Attach hose wand, dusting brush or crevice tool.

4.After using attachments, remove hose wand, dusting brush or crevice tool, store in designated holders.

5.Turn the hose actuator valve clockwise to direct air from the hose end to the floor nozzle.

6.Wrap hose around the top hose holder and re-attach at the bottom of the unit into the hose retainer.