Prepare the Machine For Operation | Addtron Technology P201 specs

•Scraping with an attachment such as the Powr-Flite®Scrape- Away® tool to remove heavy industrial deposits and residue or to prepare a foundation for installation of carpet.

•Wire brushing of concrete floors.

•Sanding with very aggressive sandpaper or sand screen discs. •Carpet restoration where shampooing & pile lifting require very

stiff brush bristles.

WARNING

To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing pad and before leaving the machine.

PREPARE THE MACHINE

FOR OPERATION

To attach the drive block or brush or other attachment, be sure the handle is “locked” in the upright position (See picture #1). Lay the floor machine on its back with the handle lying on the floor, this exposes the driving plate on the underside of the floor machine. Holding the drive block, brush or attachment in both hands and straddling the motor with your back to the handlebox, bend over and fit the three slots of the clutch plate (build into the back of the brush) over the three lugs of the driving plate. Turn the drive block, brush or attachment counter-clockwise as far as it will go until it is seated in the ready-to-use position. (See picture #2)

CAUTION: This is the only proper way to install a drive block, brush or attachment. NEVER put a drive block, brush or attach- ment on the machine by placing it on the floor and moving the running machine over it, or by placing the machine over the block or attachment and then starting the motor.

Return the floor machine to upright position and adjust handle to operating position. Recommended handle position is close to the waist with arms extended down. Lock the cam release lever into position.

NOTE: The hardened steel cam release lever does not require extreme tightening to effectively hold the handle in position. Over-tightening will shorten the functional life of the lever. To remove drive block, brush or attachment: Lay the floor machine on it’s back again and disengage clutch plate slots from driving plate lugs by turning clockwise.

HOW TO OPERATE THE MACHINE

With the drive block and pad, brush or attachment in the ready-to-use position, the handle locked at the desired operating height, and the electric cable plugged in, place hands on the handle grips and squeeze the switch triggers beneath the handle grips. (See picture #3)

This activates the motor and starts the block, brush or attachment in operation. CAUTION: When leaving the machine unattended, disconnect the wall plug and return the handle to the “locked” upright position to prevent accidental starting.

TO GUIDE YOUR FLOOR MACHINE

To Right: raise handle slightly. The higher the handle is lifted, the faster the machine will move to the right.

To Left: to change direction, lower the handle until the machine travels to the left. The more the handle is lowered, the faster the movement to the left.

TO INSTALL THE OPTIONAL SOLUTION TANK

Mount the solution tank to the front of the handle and attach with mounting brackets and knobs. Position the solution tank control handle horizontally and below the switch lever of the machine and adjacent to the right handle grip.

Remove the plug from the motor housing and insert the (long) extension tube adaptor and secure at bottom of machine with the retainer. The solution tank should be used only with a showerfeed drive block or brush.

Picture #1

Picture #2

Picture #3

Switch Trigger

P201 specifications

Addtron Technology has made significant strides in the realm of network communication solutions with its innovative P201 model. This device caters primarily to businesses seeking to enhance their networking capabilities through reliability and high performance. The P201 combines robust hardware features with advanced technologies, making it a standout choice for many organizations.

One of the main features of the Addtron P201 is its dual-port design, which allows for dual Ethernet connectivity. This functionality not only enhances the device's ability to handle multiple connections simultaneously but also provides redundancy in network connections, ensuring uninterrupted service for critical applications. The P201 supports both standard wired and advanced wireless connections, making it versatile for different deployment scenarios.

The P201 is powered by an advanced ARM-based processor, providing exceptional processing power and efficiency. This processor enables the device to manage data traffic seamlessly, reducing latency and increasing overall network throughput. With support for various network protocols, including IPv4 and IPv6, the P201 is well-equipped to handle modern network demands.

One of the standout characteristics of the P201 is its comprehensive security features. It integrates robust firewall capabilities, ensuring that sensitive data remains protected from unauthorized access. Additionally, the P201 supports Virtual Private Network (VPN) functionalities, which allow remote users to safely access the corporate network. This is an essential feature for businesses that rely on remote work, as it provides secure communication channels.

The management of the P201 is tailored for ease of use. The device comes with a user-friendly web interface that simplifies configuration and monitoring. Moreover, it supports centralized management, allowing IT administrators to manage multiple devices from a single location, streamlining maintenance and updates.

In terms of connectivity, the P201 offers multiple options including USB ports for external storage or device connections, as well as integrated wireless capabilities for mobile device connectivity. This flexibility ensures that businesses can adapt the P201 to their specific networking needs without substantial investment.

In conclusion, the Addtron Technology P201 is a powerful network solution that combines advanced features, robust security, and user-friendly management, making it an ideal choice for modern businesses looking to enhance their networking infrastructure. With its reliable performance and versatility, the P201 stands out in the competitive landscape of networking devices.